• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. Adam Walden

    Cp-563C

    I have a c model 563,I changed drive pumps and hydraulic pump and drive motors on this machine.got it all buttoned back up and have a no start situation, I checked all fuses, checked power to starter solenoid, I checked relays to neutral safety switch and parking brake. It ran when it came in...
  2. Adam Walden

    D6T Monitor has no power

    Minus all he headache of diagnosing a bad monitor and replace it and have it calibrated, don't forget to write down your old hours.
  3. Adam Walden

    953c

    It's more than likely the lift pump on the back of the huei, but start simple first,
  4. Adam Walden

    John Deere 550G won't move

    You can check pressures at the valves under the seat, to check pressures for the steering clutch check them at p2 and your pressures should be either 180psi or 250psi, find the pressure regulating valve under the seat it will have a sensor on it,take it out and test preasure there if it's below...
  5. Adam Walden

    John Deere 650G Steering Issues

    Could also be bad seals inside the steering clutch packs
  6. Adam Walden

    New Holland 555E

    Yes I knew that, but the lock hook gets its pressure from the transmissions pump,
  7. Adam Walden

    New Holland 555E

    No the hoe lock wouldn't release do you couldn't set the bucket down and that release runs off transmission pump pressure, I changed a thousand dollar solenoid before I found out
  8. Adam Walden

    Terex hml 42 wheel excavator

    Waldenadam9@gmail.com is my email
  9. Adam Walden

    Terex hml 42 wheel excavator

    Thank you my email is waldenadam9@gmail.com
  10. Adam Walden

    New Holland 555E

    Follow up on the 555E, the transmission pump in the flywheel housing had failed
  11. Adam Walden

    Terex hml 42 wheel excavator

    I have a terex hml 42 wheel excavator,I can't get any of the hydraulic functions to work except the wheels will turn, I checked power to the safety switch on the arm rest and it was good, and traced all wires to the fuse panel and all fuses were good,is there any solenoids that could keep...
  12. Adam Walden

    New Holland 555E

    I have a new Holland backhoe that will not take forward or reverse, I see the wire going from the selector goes to a fuse panel on the right side fender well, but does it go from there to a solenoid or a module, if any one has a schematic or anything would be helpful,I can't get the serial...
  13. Adam Walden

    Equalizer bar 953D

    Thanks for all of the responses, the hardest part was removing the fuel tank, it sits in a channel and of course it was a plastic tank and they swell, hopefully I can get it back in smoothly.
  14. Adam Walden

    Equalizer bar 953D

    It's crazy. Normally you can drop the front belly pan and gain access to the back side of the center pin hole, that wa on the B, and C models, but now on the D models the fuel tank is behind the center pin, if it doesn't need line bored then you are good, but if you have to have the hole line...
  15. Adam Walden

    Equalizer bar 953D

    I have done several equalizer bars on B models and C models but this is the first D model we have encountered. The center pin hole had to be line bored and in order to do this we had to remove the pumps and the fuel tank. Anyone else ran across these, or have a print out on on how to do this...
  16. Adam Walden

    3116 engine

    Thanks man I appreciate you,I've got the tooling covered,
  17. Adam Walden

    3116 engine

    Can someone get any good info on setting the rack and injector timing on these engines?I have tried my ass off to get good material on this for a while now, thanks in advance
  18. Adam Walden

    Cat 446D backhoe

    Try checking pressure relief valves on the valve sections under the rear hoe controls,, if possible try checking hydraulic pump pressures.
  19. Adam Walden

    Cat 446D backhoe

    That should work on all attachments that are down and won't go up
  20. Adam Walden

    Cat 446D backhoe

    You can Crack a hydraulic line to the hoe, use a forklift to pick the hoe up and then tighten the line back it should hold,
Top