• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. icestationzebra

    Kidney loop

    Below is a drawing of the breather with check valve option. My understanding is that if you don't have relatively dry air go thru the media bed periodically then the media becomes saturated. The checks prevent the media from absorbing atmospheric moisture when there is no air movement. BTW -...
  2. icestationzebra

    Kidney loop

    Nige - If you put desiccant breathers on bulk tanks did you use ones with 0.1psi checks? I would think otherwise they would just absorb atmospheric moisture. I've put them on gearcases but the thermal cycles help purge the moisture in these applications. And regarding those CC Jensen filters -...
  3. icestationzebra

    Just another day in paradise

    Wow - that's an antique! I'm surprised the capacitors are still good. I have used a Fluke 123 for 20+ years. Rugged and easy to use but the screen is finally stating to give up. The cheapest equivalent form Fluke is ~$2k but there there are options starting at a couple hundred up to $9k+...
  4. icestationzebra

    Grove Hydraulic Body

    The originial post states that we are looking for replacement sections for this valve body with no success so far, If you have any leads on where to find anything concerning this valve body, new or used, we would greatly appreciate it! Sorry, I thought you said you tried to find the whole...
  5. icestationzebra

    Grove Hydraulic Body

    Similar to what Crane Operator said - If you can find the same body casting you could always swap over the other parts. I would use a good straight edge to see how flat the sections are. But for root cause I'm not buying the over torque theory. The rest of the block surface would have to crush...
  6. icestationzebra

    Gehl transmission filter

    Are you getting this from an old manual? I checked one Gehl parts dealer "where used" and it doesn't show up. I check another and it showed L99184 instead. And MinnPar, whom I have no experience with, also says it was superseded by L99184. The attached site has quite a few cross references for...
  7. icestationzebra

    Please help identify this cylinder

    Delmer and Dave - Agree and yes I did forget about the displaced rod volume. I didn't want to get into the myriad of options but to be more clear about my point - it can be used but someone is going to have to do a little figuring to make sure the final product is practical. ISZ
  8. icestationzebra

    Please help identify this cylinder

    If you assume 7" bore - at 3000psi that comes out to over 57 tons! And assuming ~26" stroke it would take ~19gpm pump to get 15 second cycles. Assuming a constant volume pump set-up you need 33 hp. minimum when splitting. You may need a larger power source depending on the torque reserve. ISZ
  9. icestationzebra

    2008 hyster h60ft propane cushion tire

    thats an interesting failure mode. Was it rusting out or something get inside?
  10. icestationzebra

    2008 hyster h60ft propane cushion tire

    If I remember correctly the engine came from GM Brazil and the fuel system from a 3rd party that I can't remember. Teleflex was purchased by Impco so you might try giving them a call. ISZ
  11. icestationzebra

    730 Payload System

    I do a lot of work with strain gages. They are a small metallic grid that undergoes minute changes in resistance that directly correlate to strain (i.e. deformation) in a part. The problem is that strain can be caused by mechanical loading AND thermal growth/contraction. Temperature compensation...
  12. icestationzebra

    HYSTER 30 FORKLIFT; REPAIR INFO??

    The newer units have the SN stamped into the frame in addition to the plate, but I don't know if the old ones do. H would be a pneumatic tire, but you have a cushion tire so it is an S. I attached the model timeline 1941 thru 98. Assuming it is pre-1989 the mast should have a number stamped in...
  13. icestationzebra

    Cat

    What is that thing attached to the bed handing in front of the cab? Is that a reminder that the bed is down? ISZ
  14. icestationzebra

    460 international

    Those look like the same brakes as the M/400/450 but the part numbers don't match. The attached document says they have the same set-up as a 560. If the adjustment nuts are down all the way you need new pads. Our 400 could drive thru the brakes so they often got hot going down the road! :) You...
  15. icestationzebra

    Ford 300 industrial velocity governors

    Inherently these differ in their method as one limits air/fuel and one shuts of the ignition. Obviously cutting ignition briefly when someone doesn't make a shift early enough isn't a big deal, but would this be OK when ridding the rev limiter for minutes at a time? Wouldn't this lead to burning...
  16. icestationzebra

    tractor with trailer or dump truck?

    Flow dividers can cause issues too, depending on what design they are. If it is a valve style it can get stuck biased to one cylinder, so now it is twisting the bed on purpose. Rotary style can act as pressure intensifiers in some situations. They can also make it harder to bleed the air out...
  17. icestationzebra

    Terex that might need a little work

    I've seen a truck with an excavator mounted on the back a couple of times around MKE. (Wasn't a Gradall, might have been a Deere?) I've always wondered what they used it for as the applications have to be fairly limited. But I could see this chassis making a great mount for something like that. ISZ
  18. icestationzebra

    Transporting a Cat Forklift

    Cool, learn something new every day.
  19. icestationzebra

    Hyster H80FT Fortis auto deceleration

    Most of the settings can be made using the dash. I don't know if the decel rate is one of them given all the hydraulic system settings I'd assume it is. There is a password to get into the settings.
  20. icestationzebra

    Help to ID Model of this Telehandler

    I have never seen a Lull like that nor did I see anything similar in some older literature I have. I know they used Dodge engines so I'd be surprised to see a Ford though not impossible. A pic of the carriage and other side may help others jog a memory. ISZ
Top