• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. B

    Cat 259d Door sensor issue Fault Code 2471 - 4

    Thanks Nige, I will get a new motor
  2. B

    Cat 259d Door sensor issue Fault Code 2471 - 4

    I attached the ground of the power probe to the ground and power to 3 & 4, the motor did nothing no noise no movement. I am thinking that the motor is burnt out?
  3. B

    Cat 259d Door sensor issue Fault Code 2471 - 4

    Forgot to mention, I also tested continuity of each wire from the connector to the motor.
  4. B

    Cat 259d Door sensor issue Fault Code 2471 - 4

    To test the motor I tried in the machine and also on the bench. I attached the ground connection to the black and tested the ground and it was good. I then applied 12v to each of the pins and got nothing. I then attached ground to the motor body and tried again still nothing. The motor and...
  5. B

    Cat 259d Door sensor issue Fault Code 2471 - 4

    1. 12v 2.12v I will recheck the brown wire but that makes sense because I thought I had a reading at 1 point Yes the washer pump is working I also tried to put power to the motor unit and could not get a response from it Thanks Nick
  6. B

    Cat 259d Door sensor issue Fault Code 2471 - 4

    1st have to admit I am better at mechanical than electrical. I have taken the readings at the connector where I would hook up the motor I have tested all the fuses and all good using a power probe 3. Black is a good ground. When ignition is off 0.0 reading. brown no reading Ignition on 12.1v...
  7. B

    Cat 259d Door sensor issue Fault Code 2471 - 4

    I have took the motor off and unseized it so just have to put it back together and test out. I thought it would have blown the fuse as it was seized solid, hopefully it works now
  8. B

    Cat 259d Door sensor issue Fault Code 2471 - 4

    Nige Thanks for your help tested and the switch turned out to be bad. Replaced and all good. Only thing I have to fix now is the wiper. The washer works but no wiper, fuse is good so probably something in the motor. Nick
  9. B

    Cat 259d Door sensor issue Fault Code 2471 - 4

    Nige we got the 2471 -4 Voltage below normal and when I added a magnet strip 2471 -3 Voltage above normal CAT0259DTFTK00829
  10. B

    Cat 259d Door sensor issue Fault Code 2471 - 4

    Nige we got the 2471 -4 Voltage below normal and when I added a magnet strip 2471 - 3 above normal. Do you want me to PM you with the serial #
  11. B

    Cat 259d Door sensor issue Fault Code 2471 - 4

    Hi to all I was searching for an answer to a couple of issues and came across this forum which helped with other problems but not this one. I recently purchased a 2015 Cat 259d with 1150 hours. It had a busted windshield which I replaced, all the parts were there. After the door install the...
Top