• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. Big Iron

    320b slow track speed

    The right hand track speed has slowed to about nhalf the left sides speed. There are no bad noises and when you lift the track off the ground it appears to have a normal speed (it may be a little slower but not by much) reverse seems to be normal and definitely has more power than forward. I...
  2. Big Iron

    WBM 24" Extreme duty frost/rock bucket

    WBM 24" Extreme duty V-bucket near new condition Manufacturer list 7700.00 USD 1" 400 brinell steel bottom and cheeks 100,000 psi yield WBM 200 series manual coupler (hyd available from WBM) teeth are new ESSO bucket was purchased for a single project and has not been used since 3000$ obo...
  3. Big Iron

    320B Electrical problem

    320 B 8900 hrs 5BR SN while operating yesterday the Battery/Charging fault light pops on. I checked the voltage at the Batteries motor off 25.6V started the engine at idle 27.9 to 28V. all the electrical stuff works (heater, radio all computer functions, ect) all connections look good and are...
  4. Big Iron

    320b track adjuster

    well it looks like i have to replace the seals in my track adjuster on the 320. having never done this on the 320 i thought i would see if any of you have any tricks to complete this without breaking the tracks sn is 5br00839 thanks
  5. Big Iron

    Cat 320B fuel problem

    my 320 has developed a fuel problem i can't seem to figure out. when i start it it will smoke dark grey to blk smoke. this will continue even when the machine is up to operating temps. if i start working it the smoke clears up and it looks normal as long as i continue working it. once i let...
  6. Big Iron

    T190 Bobcat

    2005 T190 Bobcat 933 hrs enclosed cab with AC/Heat tracks are at app 65% undercarriage 75+% front aux hydraulics manual quick change bucket w/bolt on cutting edge forks lift cylinders come with removable height restrictors to limit lift height for working inside buildings this machine...
  7. Big Iron

    MQ plate compactor

    MQ model MVC 80VHW plate compactor 3080 # centrifugal force 17" x 22.1" plate size 11.5 quart water supply Honda GX 160 5.5 hp power wt 180# this unit has had very little use and is in excellent condition 750.00 obo located in Oregon call 5o3 349 9877
  8. Big Iron

    CAT 320 neutral safety switch

    320B s/n BR008xx i have replaced the micro-switch at the N/S lever and rebuilt the N/S valve under the cab. the N/S works fine when cold, once the hyd oil warms up it will sometimes work immediately and some times it will take 2 to 30 seconds to activate the hyd system. it will always work...
  9. Big Iron

    WBM Extreme Duty Bucket

    V-bottom 24" extreme duty Weldco-Beales bucket excellent condition. this bucket has had very little use, was purchased for a specific project and has not been used since. base edge, leading edge, cheek plates and bottom are 1" 400 brinell steel original teeth (worn out) shanks are near new you...
  10. Big Iron

    Trimble GCS900 Dual GPS system

    Trimble GCS900 Cab Kit to include CB430 with latest software version upgrade Two MS990 Smart GPS Receivers with Glonass Three LB400 Lightbars SNR910 Machine Radio with Bracket and Antenna, All transport cases. Unit has wiring/sensor setups for excavator with up to 55' boom length to...
  11. Big Iron

    Trimble GCS900 on an Excavator Dual GPS system

    Trimble GCS900 Dual GPS system Trimble GCS900 Cab Kit to include CB430 with automatics Two MS990 Smart GPS Receivers with Glonass Three LB400 Lightbars SNR910 Machine Radio with Bracket and Antenna, All transport cases. Unit has wiring/sensor setups for excavator with up to 55' boom...
  12. Big Iron

    pieces and parts for sale

    j-120 carco winch w/hyd pump and drive shaft 8" pitch track group (8230 terex) will also fit 2-u, 13,14,15a cat 65 to 70% (pins & bushings have not been turned) 6-71 dd runner pm for photos, more info and prices
  13. Big Iron

    River levels, I hate em

    Well the Willamette is finally down enough that we can start the tie-back installation. It has put us 11 days behind schedule, but I think we can make that up by using 3 drills, 2 long reach from the top and a Clem down on the revetment. Heres a few photos of the 1st long reach drilling the...
  14. Big Iron

    Memorial Day

    I have been sitting in the kitchen drinking my morning coffee and complaining to myself about the rain when this came to mind. I know that this is a Christmas Poem, however for some reason it came to mind early this year. I guess that everyday is like Christmas to us at home, not so for...
  15. Big Iron

    Concrete Saw

    Target Pro 4 self propelled Concrete Saw 14 hp elec start engine starts good and runs perfect. up to 30" blade size with existing guard, however there is no saw blade currently on the machine. I have not used this machine in over 4 years has been stored in the shop and is taking up space...
  16. Big Iron

    Logging Oregon 60's 70's

    Finally got a rainy Sat morn so I scanned some more old photos from the past. This site was above Neskown, OR in the late 60's or early 70's. I was driving for W.E. McFarland at the time. The Washington 208 yarder was streched out close to 7000' on several of the roads they logged, they were...
  17. Big Iron

    How to move your shop to a new location

    All you need is 2 bolsters, 1 welder, a 4100 to lift it and a Big Mack to haul it. Problem: Big Mack is powered by a 16V71 Detroit and is inside a metal building, you want to talk about LOUD, earplugs and muffs didn't make a dent in it!!! Driver couldn't hear for a week!
  18. Big Iron

    320 BL swing problem

    the swing on my 320BL Cat has a problem! While working it last week I swung the machine to the left and came up hard against something, swinging the machine to the right about 1/2 way around it came up hard again. I can swing very slowly and the machine will swing 360 degrees, however trying...
Top