• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. D

    Carlson cp75 shop manual

    Looking for a shop manual or at least a drawing of electric pickup primer pump location. I can hear it but not a clue how to get to it. Paver runs great first seven or eight hours but starts loosing rpms after that. Shut it off for 10 minutes and it runs fine for a little while and starts the...
  2. D

    Ir dd24 losing prime

    Great thanks
  3. D

    Ir dd24 losing prime

    That was my next thought. A 3-6 psi electric pump and new filter housing. Did that setup work for you? Ordering isn't easy seems to be backorder and out of stock everywhere. Thanks for the reply
  4. D

    Ir dd24 losing prime

    Hey great thanks for your help
  5. D

    Ir dd24 losing prime

    I have a 2006 ir dd24 with a 1.4 cummins that seems to lose prime after a few hours. Quick shot of either and it starts right up. Pumping the primer pump seems to have no pressure..called local ir dealer they can't find a part number for the combination pump and filter. Any thoughts or help...
  6. D

    Bomag bw 900 -50 wiring

    Looks like I tied in to the vibrator circuit. And someone else has been here before. A couple other cut jumpers and insulation peeled back.
  7. D

    Bomag bw 900 -50 wiring

    After another 2 hours of tracing wires and grounds i am still nowhere. Key switch is working properly, everything is grounded, and i have power to the starter relay. But still none to the other circuits. Again if i jump power to the fuses i have horn,vibrator, and water but it won"t turn over...
  8. D

    Bomag bw 900 -50 wiring

    Just checked all connections everything is good But when i turn the key i have no relays clicking i guess i will keep digging
  9. D

    Pavijet Mini Paver Finisher now in the USA

    We were on a prevailing wage job Definitely cut the labor by almost half. A little help probably would have made a little difference but the job we were on had many angles and obstacles definitely a better patch job than by hand
  10. D

    Pavijet Mini Paver Finisher now in the USA

    Definitely a learning curve. Did about 1200' in 3 hours street had many different angles and humps and bumps it adapted pretty well. We ate missing the auger extension so will have to fabricate one of them. Definitely a game changer for trench patching
  11. D

    Pavijet Mini Paver Finisher now in the USA

    Let you know after tomorrow going to lay about 1500 feet of trench
  12. D

    Bomag bw 900 -50 wiring

    serial # 861834071253 2012 year
  13. D

    Pavijet Mini Paver Finisher now in the USA

    Bought used on Ritchie Bros auction in Orlando Was missing the control box,remote and the auger extension Bought the controls and have been making the other pieces
  14. D

    Pavijet Mini Paver Finisher now in the USA

    We have built a new inner shoe for the screed and a new lift cylinder for the right side wing the tolerance is so close that if any asphalt builds up behind the cylinder it bends the rod and breaks the cylinder cap
  15. D

    Pavijet Mini Paver Finisher now in the USA

    Just purchased one in February on Ritchie bros auction Parts are very expensive have fabricated some ourselves for a tremendous savings Should be paving with it next week Let you know how it goes
  16. D

    Bomag bw 900 -50 wiring

    Thanks for the help All fuses are good, swapped around relays, Everything was fine when put away for the winter. Put in a new battery and this is when it started. I'll get the serial number next week. Thanks again
  17. D

    Bomag bw 900 -50 wiring

    does anyone have a wiring diagram for this It will start but has no other electronics. If i hook a jumper wire to the relay bank then i have horn,vibrator, and water butt then it won't crank over cut the jumper and it will start Thanks for any help
  18. D

    JLG 40HA problems

    Did you ever get the tower lift problem resolved Mine is doing the same thing Thanks Jlg won't even talk to you on the phone
  19. D

    JLG 40HA wont go down

    ok finally got it in my shop. Been messing with it for two days. What I have found is if I unhook the tower lift up wire from the solenoid when shut off nothing happens. If I start the machine and try to lift the tower lift the machine stalls like it does when I am trying to lower the tower...
  20. D

    JLG 40HA wont go down

    Thanks I was thinking of the same thing Hoping to avoid the mess
Top