• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. 4

    Maintenance Records

    Is it possible to recover the maintenance records for a caterpillar skid steer by the serial number?
  2. 4

    299D XHP drive motor sensor

    Update. I replaced jumper from harness to speed sensor. Ran the machine for an hour with no more Issues. Thanks guys for the help.
  3. 4

    299D XHP drive motor sensor

    Thanks Chrisso I do not have a schematic. Where can I find one, and an actual photo of the ECM location under the cab?
  4. 4

    299D XHP drive motor sensor

    Yes, all four are coming in at the same time. Where is the ECM actually? Do you know a part number for the harness from ECM to sensors? I tried tracing the harness up from where the speed sensor jumper ties in. I can track the machine around all day and never get a code, but as soon as I put it...
  5. 4

    299D XHP drive motor sensor

    Thanks for the reply. Serial # is JJST01153 It is 2 speed but it does not seem to be stuck in high. There is no delay in either track when engaging high gear. Codes are Unexpected motor speed detection disabled. E695-3 2685-8 2686-8 2687-8. I have seen a low 8v power code at one point...
  6. 4

    299D XHP drive motor sensor

    I know this is a common thread on the forum, but I am having some of the same Issues with both left and right drive motor speed sensor codes. I have used the procedure to check the wiring. Continuity is good on all wires through both harnesses. I replaced the hydraulic filter, and the gear oil...
  7. 4

    Cat 299d drive motor sensor

    I am having some of the same Issues with both left and right drive motor speed sensor codes. I have used the procedure to check the wiring. Continuity is good on all wires through both harnesses. I replaced the hydraulic filter, and the gear oil in both drive motors. There was no sign of metalic...
  8. 4

    2015 299DXHP High Flow not working

    Nige, thanks for that. I pulled the fuse and inspected. Fuse looked fine but i replaced anyway and high flow is working now. Thanks again.
  9. 4

    2015 299DXHP High Flow not working

    Sorry for the delayed response. The serial number is jjst01153.
  10. 4

    2015 299DXHP High Flow not working

    Yes. It has the 14 pin plug and the pins that are jumped are K to B & K to N. I read in an older thread that someone was having this same issue and it ended up being a check valve. Do you know where this check valve would be? I do not have any diagrams.
  11. 4

    High Flow Indicator light on Cat 289C2

    Could you give some insight on the location of this check valve? I am having the same issue with not getting a light when plugging in the high flow jumper.
  12. 4

    2015 299DXHP High Flow not working

    I have just received the high flow plug from SSG and after installing, I am not seeing the high flow symbol show up. Does the continuous flow have to be engaged for the high flow to also kick in?
  13. 4

    CAT dozer blade wiring help, please

    Any updates on this issue? I am having the same issue. Wiring is correct. I have 12v to each solenoid and everything is routed as the drawing shows. When taking the solenoids apart one has two springs and one only has one. I beleive these have been take. Apart before and possibly not put back...
  14. 4

    Cat 299d drive motor sensor

    Is there any way to bypass the drive motor sensor/ speed sensors?
Top