• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. B

    Case 480E LL Parking Brake Assembly

    Thank you for your input. I will pull it and see if I have a tap long enough to get through it, not sure yet how hard it is, making an assumption it would only be case hardened since the splines in it wear quickly. Thanks Again, Bob
  2. B

    Case 480E LL Parking Brake Assembly

    Is there a new style parking brake for this tractor. I have replaced the disc itself but it appears the output shaft grooves from the trans are worn also. I am thinking about drilling the disc and either installing set screws or a roll pin to keep it from rocking side to side and possible...
  3. B

    Case 480E LL D90094 PTO Hydraulic Motor

    Coy, The pump functions great, I was not going to pay 1000.00 for a used one. All I needed was the end shaft seals which Char-Lynn tech support acquired the numbers for me and I have ordered them. Thank you, Bob
  4. B

    Case 480E LL D90094 PTO Hydraulic Motor

    Coy,
  5. B

    Case 480E LL D90094 PTO Hydraulic Motor

    I have found some information pertaining to seal kits for the PTO hydraulic motor (D90094) on a 1989 Case 480E ll. Actually it is a Char-Lynn 109-1027-004, and the shaft end seal kit is part# 61236-000 which includes the shaft seal, dust seal and face gasket, the rear end seal kit is 61234-000...
  6. B

    I have found some information pertaining to seal kits for the PTO hydraulic motor (D90094) on a...

    I have found some information pertaining to seal kits for the PTO hydraulic motor (D90094) on a 1989 Case 480E ll. Actually it is a Char-Lynn 109-1027-004, and the shaft end seal kit is part# 61236-000 which includes the shaft seal, dust seal and face gasket, the rear end seal kit is 61234-000...
    • bselff
    • Profile post
  7. B

    Case 480E LL D90094 PTO Hydraulic Motor

    Could someone point me in the correct direction in finding the specs (i.e. gpm, etc.) I am possibly (maybe I can fix this one) looking for a replacement. I have an issue with the front seal item # 6 on diagram (#N6007,N13480,D74401) leaking due to a out of round drive shaft (bent) and case does...
  8. B

    Lift Pump

    Again, Thank all of you for some great input. Bob:usa
  9. B

    Lift Pump

    Okay, Because I am soooo anal, and was worried about the pump not looking the same in appearance with the connections, I was very wrong. The pump connected with the original fittings perfectly. I appreciate all the input from everyone. Have a great day.... Bob
  10. B

    Lift Pump

    I use something similar on my boat, it is designed specifically for marine use, thicker walls and UV resistance. Bob
  11. B

    Lift Pump

    Again, Until Monday, when it is supposed to be delivered, I won't know anything about the current to the new connections. When you refer to composite, are you talking about something similar to plastic with the snap together type ends. Let me know where I can look at one on line. Thanks, Bob
  12. B

    Lift Pump

    Thanks for all the input, I am waiting for the pump to arrive and will see what I need to do to make it work. I will try and avoid adding rubber hose, it always deteriorates over time and it might screw up the injector pump. Thanks Again, Bob
  13. B

    Lift Pump

    Tinker, That is similar to the one I purchased,, my issue was the line connections which are not the same, meaning the steel lines will need to be bent or manipulated to attach. Bob
  14. B

    Lift Pump

    We're on the same track.. Thanks, Bob
  15. B

    Lift Pump

    Thank you, but where live in (BFE) there isn't anything close. I can try Tucson which is about an hour away.
  16. B

    Lift Pump

    Exactly why I wanted a pump with similar ports and connections. I am sure it will fit the 4-390 but I did not want to deal with the modifying the steel line nor did I wish to cut the line and replace with rubber. Thanks for the input, have a great day, Bob
  17. B

    Lift Pump

    Better Attachment
  18. B

    Lift Pump

    Current Lift Pump 4-390 Non-Turbo No, the pump originally looks like the picture with the yellow color J904374, the replacement pump is a 84142216 as also pictured ( http://www.ebay.com/itm/84142216-Case-Cummins-Fuel-Pump-1085B-1150E-1155E-1840-1845C-1896-2096-J904374-/230675583435 ) Bob
  19. B

    Lift Pump

    I have a 1989 Case 480E LL 4-390 non turbo unit. I have been looking for the lift pump J904374 but have only seen the superseded number 84142216 which has the ports in a different configuration. Does anyone know where I can find a direct replacement pump with the port configuration the same. The...
  20. B

    1989 Case 408E ll Shuttle Cut Off Solenoid

    Good Morning, I have bench tested the solenoid and when applying 12v it moves the plunger. I have checked the wiring and have 12v at the solenoid, floor micro switch(relay) and bucket control handle. I have looked at the schematic I have from some books I purchased for it (3) case manuals but...
Top