• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. P

    Volvo ec140BLC Throttle issue

    Hi NEVREPAIR I'm based in Ireland and I got my VECU from a scrapped machine in a local breakers. He allowed me to try it out to see if it worked before I paid him to see if it worked. It cost €1000. What is the issue with your machine?
  2. P

    Volvo ec140BLC Throttle issue

    Hi I got the machine sorted by fitting a new Vecu It still revs around 1300rpm at idle but it's working fine otherwise
  3. P

    Volvo ec 140 blc error codes

    What does error code 25 and 12 mean
  4. P

    Ec 140blc throttle controler

    Can you fit a manual governor to a volvo ec140 b instead of the electrical actuator
  5. P

    Volvo ec140BLC Throttle issue

    Could I fit a manual governor to my engine instead of the electrical actuator. The volvo wheeled diggers have a manual throttle which can be adjusted with a cable.
  6. P

    Volvo ec140BLC Throttle issue

    Hi Emre did you get your volvo 140 sorted?
  7. P

    Volvo ec140BLC Throttle issue

  8. P

    Volvo ec140BLC Throttle issue

    If you look at the two diagrams you sent me the two switches on the right are different . One of the has three positions and the other has only two positions.
  9. P

    Volvo ec140BLC Throttle issue

    What is the switch with the turtle and the hare for
  10. P

    Volvo ec140BLC Throttle issue

    Hi Thanks for the reply I will check later but the switch on the right isn't doing anything for me. I think it only has two settings neutral and push forward to stop.
  11. P

    Volvo ec140BLC Throttle issue

    Its spring loaded to neutral but the machine is at full revs when the switch is in neutral
  12. P

    Volvo ec140BLC Throttle issue

  13. P

    Volvo ec140BLC Throttle issue

    The machine is 2002 so they must have changed the switch on later models.
  14. P

    Volvo ec140BLC Throttle issue

    Hi Thanks for the reply I have the same switches but the switch on the right in my machine only has two settings and will only turn off the machine. It doesnt have three positions.
  15. P

    Volvo ec140BLC Throttle issue

    Hi I can use the auto switch which lets the machine run at full throttle. I dont have a switch which allows me to change the throttle to idle. Im still thinking its probably the vecu is my issue.
  16. P

    Volvo ec140BLC Throttle issue

    Thanks for the help. I will have a look and see if I have the switch with the three positions.
  17. P

    Volvo ec140BLC Throttle issue

    I have tried a different ecu (the one behind the cab which makes no difference. I think it is either the V-ecu or the controler. Is there any way to establish which one is faulty.
  18. P

    Volvo ec140BLC Throttle issue

    Thanks for the response. I can use manual mode but I have only one setting in manual mode which is full throttle. Is there any way to adjust the throttle in manual mode?
  19. P

    Volvo ec140BLC Throttle issue

    The engine has been rebuilt but the controller is not new. The issue with the engine reving up to max revs was there before the engine rebuild .It was also caused by turning on the lights and wipers. We found a faulty relay in the battery compartment and this fixed it reving up when you turned...
  20. P

    Volvo ec140BLC Throttle issue

    Thank you for your help. When I remove the governor I can work the machine manually by pulling the rack in and out. It seems to work fine. The previous owner had cut the leg off the stop solenoid. I replaced it with a new stop solenoid but the machine would not start when I fitted this. I only...
Top