• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. C

    2014 Takeuchi TB240, Low Voltage Error: 1704 ?

    Yeah, agreed, thanks. I should have been more clear in that I didn’t apply the grease to the actual pins in the connection, only a light coating to the silicone seals around the outside of the male connectors… Mainly for easier installation and removal later, if necessary.
  2. C

    2014 Takeuchi TB240, Low Voltage Error: 1704 ?

    Just a little more info... Thanks to tool_king, and the wiring diagram, I did figure out that the controller of course uses CAN signals for all of its readings. Checked all of the grounds that I could find and cleaned, and dielectric greased the main ECM terminals. It is intermittent some...
  3. C

    2014 Takeuchi TB240, Low Voltage Error: 1704 ?

    Hello all, Ran into an odd issue with our 2014 TB240 over the weekend... Operating fine and out of the blue got a warning flashing on the control panel, looked it up, and it's error code 1704, "Main power supply voltage error; Voltage low". Machine operates fine, other than the warning...
Top