• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. C

    442 Instument Panel

    Does anyone have the wiring schematics they would share on the Bobcat 442 excavator Instument Panel PCB's? I am trying to troubleshoot the printed circuit boards. As I have 12vdc power input, but no power output. And/Or can you recommend a good PCB repair service. And/Or anyone have a...
  2. C

    Bobcat 442 starts and runs. Have no hydraulic functions. Console Display is also not functioning. Fuses not blown. Arm Switch tested and jumpered.

    I multimeter tested the BE1 power terminal connections at the EPROM controller to X1 pins 1,2,3 (12.4 vdc recorded) pin 4 (Ground confirmed) pin5 (12.4 vdc recorded with key on).
  3. C

    Lockout switch

    If it's stuck, try cleaning it with electronics spray cleaner to see if it frees up. If not after fully testing with a multi meter, replace it.
  4. C

    Bobcat 442

    Hello, are you still around? would like to pick your brain as to what fixed your 442
  5. C

    Bobcat 331 No Hydraulics

    What did you ever find out what was wrong?
  6. C

    Bobcat 442

    Hi, did you ever find your problem? Sounds like the same problem I'm having
  7. C

    Bobcat 442 starts and runs. Have no hydraulic functions. Console Display is also not functioning. Fuses not blown. Arm Switch tested and jumpered.

    Gear pump attached to Main Piston Pump was taken off and viewed with gear movement with engine running. Need ideas of where to look for problems. No unusual noises or smells. Fluids are all at level.
Top