• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. D

    Bobcat T300 Dead.......

    New bat fixed it. I feel like an idiot now, but I never thought a 2 year old battery would take a dump this bad. I started it 6-7 times in a hour peroid of time and it never even acted week at all, then bam, its got nothing. I was expecting the worst and thinking it was time to call bobcat out...
  2. D

    Bobcat T300 Dead.......

    I was able to clean all the cables up today, and now I have power at the fuel selenoid and the starter. It will just crank it over about 1 turn, very slow. Im going to have the battery checked in the morning, the bobcat computer is only showing 8.6 volts.
  3. D

    Bobcat T300 Dead.......

    Ok, had some time today to do some more checking, and now the screen is lighting up and working. I press the run/enter, then the password, then hit run enter, then press the start button. Some times it will then make the screen go dead, other times I can hear the fuel pump selenolid working...
  4. D

    Bobcat T300 Dead.......

    Thanks for the reply, do you remember if the screws are hex or torx? Thanks
  5. D

    Bobcat T300 Dead.......

    Well my T300 is dead again, this time im lost. I was using it today to unload some skids off the trailer, 1 at a time, then I would shut the machine off and unstack the skids by hand. After the 6th skid, the machine decided that it did not want to re start. I pressed the run/enter button...
  6. D

    Case 480E will not move

    Thanks for the help. Can you tell me where I need to check for fluid? We have no book or manual, so im not sure where to check? Same with the solenoid. Where exactly is it located on the left side of the machine? Thanks for the help!
  7. D

    Case 480E will not move

    Im posting this for a friend-He has a Case 480 E backhoe that will not move. Said he was loading dirt with it and it just stoped. It runs fine, just will not go forward or backward. He pulled it home and is not sure whats wrong with it. Any suggestions as to what to look at? We have not checked...
  8. D

    T300 Bobcat Hydro Leek.....

    Thanks for the reply Atco. I stoped by the bobcat dealer and picked up the seals, so when I get a rainy day I plan to attempt to fix it. Is there any way to do this with out throwing things out of adjustment? Thanks
  9. D

    T300 Bobcat Hydro Leek.....

    My T300 developed a hydraulic leek last week, and I have found that it is leeking at the very top of the hydro, where the right side steering connects to the shaft in the hydro. I talked to my bobcat dealer and they want me to bring it in for a seal, but how hard is this to do myself? They said...
  10. D

    john deere 690 E LC comments

    Hitachi did have someting to do with the 690ELC. I even have purchased cab parts at the deere only dealer and they came in hitachi packages. And the cab on the 2 machines is exactly the same!
  11. D

    Caterpillar Still Won't Move!!! 951C

    Just wanted to let everyone know we figured it out finally. It ended up being the spline shaft going from the torque converter to the transmission. It was wore off almost smooth. Thanks for the replys everybody!
  12. D

    Caterpillar Still Won't Move!!! 951C

    Yea that would make sense I guess. I appreciate it and I'll let ya know what I find out.
  13. D

    Caterpillar Still Won't Move!!! 951C

    If the linkage isn't adjusted correctly would this have anything to do with the pressure only at 120 psi?
  14. D

    Caterpillar Still Won't Move!!! 951C

    Thanks for the replys. I know the linkage is all moving but I guess I don't know for a fact that it is in neutral. I mean the shifter is in the neutral position but I'm guessing that doesn't tell me much. And yea that pressure range sounds VERY familiar. Screens and filters are all very...
  15. D

    Caterpillar Still Won't Move!!! 951C

    Ours has linkage that kind of goes to the side...I am pretty sure that there is a valve body up on top like you said though. I'll check into it.
  16. D

    Caterpillar Still Won't Move!!! 951C

    Our 951C won't move. Dad was pushing some brush and went to put it in reverse and it didn't move. Put a new pump on that is by the transmission. Checked all the valves we could find. Replaced some O-rings. We're stuck on what to look at next. Still only getting about 120 psi at an idle and not...
  17. D

    Adjusting Deere Tracks

    how many hours can i expect to get out of the tracks if i do remove a link. I only put on about 50 a year now. Thanks
  18. D

    Adjusting Deere Tracks

    Anyone ever used a sledge hammer and a big heating tip to remove a track pin?
  19. D

    Adjusting Deere Tracks

    Anyone have a solution to this? How expensive is a mobile press to come out and take a link out? Im about 20 miles from my dealer. Thanks
  20. D

    Adjusting Deere Tracks

    My idlers and sprockets are good. Im not so sure I want to let pressure off and push the adjuster in. Wont that screw up the seal? When I took off the fitting and let the grease out the adjuster did move in a little. Then I put the fitting back in and pumped up the grease again and the adjuster...
Top