• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. Self-Jameel

    Another drunk driving tragedy

    My Goodness, what an avoidable death, RIP to Johnny & Matt. Accept Ma deepest condolences Welder Dave... Just Ten years Max For a life taken? 2 lifes taken for Fuvk Sake.
  2. Self-Jameel

    Mom passed away this morning

    Ma thought are with you brother, sending you Ma deepest condolences.
  3. Self-Jameel

    How Did You Find Us?

    I found about HEF during a google search, wasn't too familiar with the forum rules and regulations and didn't introduce Ma self properly but I was attended to and even cart a whole lots of information to Ma advantage.Shout out to every soul dead or alive in this forum.
  4. Self-Jameel

    D6R(2HM00618) Transmission overheating

    Cross checked the torque convertor for any wear or tear as well as install new transmission pump but to no avail the problem still persisted.
  5. Self-Jameel

    D6R(2HM00618) Transmission overheating

    Hello folks happy blessed morning from this side, I've been working on this machine (D6R) I rebuild the transmission not long ago, service the transncooler as well as the engine cooler but the problem still persisted. Hopefully waiting for your intake on this,thanks to you y'all.
  6. Self-Jameel

    EX 320 L, S/N (3XK01125) Powered By 3116 Engine.

    I checked the final drive as well but couldn't come up with anything as all the planetary gears a all good. Even swipe the valve beneath travel pedal to see if one Is is faulty.I'm thinking about swapping the crossover valve to see buh it's seems to me the both are not the same because another...
  7. Self-Jameel

    EX 320 L, S/N (3XK01125) Powered By 3116 Engine.

    I reassemble it myself and give outmost attention while fixing the swivel as to clear my mind off that area once and for all. And yes I just did that now operating the faulty track with the boom both in and out, same thing with the stick in and out. Thanks a bunch..
  8. Self-Jameel

    EX 320 L, S/N (3XK01125) Powered By 3116 Engine.

    But again, with a new rebuild swivel and Interchanging the 2 drive Motor with each other didn't rule out the case drain test? Just curious though.
  9. Self-Jameel

    EX 320 L, S/N (3XK01125) Powered By 3116 Engine.

    Thanks Alot as you the only one who see it deem fit to help me. I will go through the pdf file you sent to me and aw give you feedback shortly.
  10. Self-Jameel

    Cat 315L

    What does that intale pls, as I'm facing almost the same issue as I've also created a thread but no rely yet tho.
  11. Self-Jameel

    EX 320 L, S/N (3XK01125) Powered By 3116 Engine.

    I started working on this machine some couple of days back, on the right track if you view the machine from the operators cabin.the problem is all the implement is fine bucket, stick and boom to be more precise but the right tracking is very slow hard to even move on a level ground. Done some...
  12. Self-Jameel

    CTA 8.3 Cummins

    Yes I built the engine prolly 3 months back.
  13. Self-Jameel

    CTA 8.3 Cummins

    Yes I built the engine prolly 3 months back.
  14. Self-Jameel

    CTA 8.3 Cummins

    Not hard starting buh it's smoking (white)really bad
  15. Self-Jameel

    CTA 8.3 Cummins

    Change a new turbo cause the old one is faulty.further more I'm more disturbed cos it wasn't long I overhaul the engine in frame..
  16. Self-Jameel

    CTA 8.3 Cummins

    Pls folks I need help, too much air coming out of the engine crankcase, for a newly built (overhaul) engine A new turbo charger as well,what might likely be the problem
  17. Self-Jameel

    3406

    The Reason behind changing the injection (Main Pump) was that diesel is mixing with oil. On arrival I removed the New pump that was installed retime it together with the engine to TDC everything was working just fine few hours into the machine operation it started misfiring bringing out out...
  18. Self-Jameel

    3406

    I Honestly I don't have the S/N of the engine but I know it's mounted on 16G Motor Grader (93U Model) The drive gear is well intact as I checked again this morning.
  19. Self-Jameel

    3406

    And the white smoke? Also aw need to know the right procedure on FINDING THE TDC, after I turned the engine and the both rocker arm both are a bit free and 6 rocker arm where both stuffed.went ahead to time the pump saperately.
  20. Self-Jameel

    3406

    I remove the pump completely, timed the engine to TDC and time the injector pump as well. Start it was a go. No huddles till after 2 hours of normal operation
Top