• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. T

    Axle information question

    I’ve talked to the company in CT who specialises in LULL axles. They said they will check whether parts I need are the same, and get back to me. The difference is the ones I work with have outboard “dry” disc brakes. The ones I have are part number 070BP201 and LULL one is 070BP202 I’m looking...
  2. T

    Navigator RT5500 rough terrain forklift

    I didn’t know they had Isuzu engines. I’ve been to their factory a few times, met Mark Chrisman once - but I’ve seen only Kubota and some Kohler engines on their machines. Navigator is very protective and skimpy on the information. Good luck with that.
  3. T

    Axle information question

    Does anyone have parts book for the older Spicer 7036 type axles? There’s plenty of the service manuals, but I need Spicer part numbers. Going by GEHL part numbers is EXTREMELY EXPENSIVE.
  4. T

    ITL ( JCB) SS600 Synchro Shuttle question.

    Whoever might need it. Looking at spin on filter, there’s two 1/4” NPT plugs, 1/4 internal hex. Top is Torque Converter IN pressure Bottom is main pressure gallery before spin on filter. Going to need to remove filler/dipstick tube to plumb in diagnostic connectors. It’s OK nothing splashes...
  5. T

    2014 Case 580SN steering got tight.

    Pump coupling problem.
  6. T

    2014 Case 580SN steering got tight.

    Pilot switch or its circuit. Trash in hydraulic tank.
  7. T

    2014 Case 580SN steering got tight.

    Another thing: even if machine has single gear pump - there should be a priority valve for steering, that can act up.
  8. T

    2014 Case 580SN steering got tight.

    Is outrigger valve bank separate from the backhoe bank, are outriggers also pilot controlled, or cables?
  9. T

    2014 Case 580SN steering got tight.

    Is it pilot controlled or cable controlled DCV? If the backhoe is still strong - most likely it is not a pump.
  10. T

    2014 Case 580SN steering got tight.

    Not well versed in N series, but I think SN has the piston pump ( N has gear pump I know that for sure), if it is piston pump, it might be an LS signal issue. Dread head something in either loader or backhoe, and see if it’s gets better. If it does - that’s an LS signal problem. PS - again not...
  11. T

    ITL ( JCB) SS600 Synchro Shuttle question.

    Can someone tell me where and which the “torque converter IN” pressure port on that thing. And where is torque converter pressure regulating valve ( not pressure relief) in it? Manuals don’t say that, only specify what pressure at certain RPM and Temperature should be. Thanks in advance.
  12. T

    1995 ford f800 5.9 cummins repair manual and wiring diagrams or electrical software.

    Yeah! I think Google has coupler of thousands, in any shape or form possible.
  13. T

    Sky track B8400, need help

    Hi guys. Does anyone can help me with manual or at least steering/brake manifold diagram for old Skytrack B8400? I can’t find anything on these pre JLG models, and already getting lost in the numerous versions of the newer circuits. Steering sometimes getting heavy, operator can’t remember...
  14. T

    charging pressure too high on Bobcat T300

    The plugged charge filter - of course. Also leak in the brake piston. I was about to work on 300 once, but it didn’t happened, so I don’t remember where the parking brake and high speed gets powered from. But majority powers from the charge circuit, or at least from the same gear pump.
  15. T

    charging pressure too high on Bobcat T300

    And you can’t clean the return filter. You can clean charge filter - but replace them after failure like this, because tiny particles are still stuck in that mesh.
  16. T

    charging pressure too high on Bobcat T300

    If you hear the squeaks - it means you’re other brake piston seal is leaking, and you burning another set of brake discs.
  17. T

    charging pressure too high on Bobcat T300

    So the loop didn’t get the metal shards? Metal shards will plug your filters very fast. They will make bypass on the return filter open up and render that filter useless. Also of your parking brake and high speed circuits powering off of the charge circuit - leak in the parking brake will drop...
  18. T

    charging pressure too high on Bobcat T300

    What was the reason for replacing final drive? Was it hydraulic side problems or planetary side? Is the right side has power now. Asking because if it was hydraulic side problem, the debris from the motor damages the pump also.
  19. T

    RT755 slip ring tower

    That’s what I decided to do about short wires. I think it might be better than extending with the piece of wire of different color with crimped sleeve and heat shrink.
  20. T

    RT755 slip ring tower

    I did my best. I actually marked two pairs with A and B that didn’t have anything on them. I’ll try local dealer, but I don’t have big hopes for it.
Top