• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

John Deere 310d boom cylinder rebuild/remove

R

Richie0

Active Member
Joined
Aug 30, 2021
Messages
26
Location
Pennsylvania
Hello, the boom cylinder on my 93 JD 310d has started squirting oil out of the main boom cylinder seals. How do I get the boom cylinder out of the boom to have it rebuilt? I can only find one hydraulic line when I look for how it would come out.. has anyone done this?
 
R

Richie0

Active Member
Joined
Aug 30, 2021
Messages
26
Location
Pennsylvania
Hi midnight, that’s the one. I have seen that video, is there a reason it’s not taken off of the machine? The guy rebuilding it would prefer to have it in the shop vs on the machine.
 
M

Midnightmoon

Senior Member
Joined
Nov 9, 2013
Messages
445
Location
Ny
Swing the boom to one side lower it down like in the picture knock out pins and slide it out. The guy in the video may not have been able to get that pin out or he rebuilt it himself. I just fixed a cylinder on a machine because when the customer put it back together he wrecked the seals
 
You must log in or register to reply here.
Top