• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Volvo EC210 blc V1067

Dave Neubert

Dave Neubert

Senior Member
Joined
Jul 18, 2018
Messages
1,660
Location
Monroe NC
I need to plumb a thumb on this machine it has a hammer and a shear circuit the shear circuit will get me what I need to the thumb but I need to reduce the pressure to 2500 psi. I looked on the control valve and it does not appear to have a individual circuit relief for this section is there a place to reduce it or do I need to plumb inline reliefs in the system
 
M

Mimir

New Member
Joined
Jan 24, 2021
Messages
2
Location
Kenya
Can someone please help me identify the obd port location in my Volvo ec210b
 
funwithfuel

funwithfuel

Senior Member
Joined
Mar 7, 2017
Messages
5,599
Location
Will county Illinois
Occupation
Mechanic
Maybe, let's start with hitting new member introductions. Where you're at, what you're doing, that sort of thing.
In regards to your question, On the right side back panel there should be a small rectangular opening . It may still have the trim plug which is the same size, has a little pinch grip to remove. Behind the hole is a small black plastic rectangular connector. That is the VCADS connector. That machine was not fitted with OBD connectors. Hope this helps
 
You must log in or register to reply here.
Top