steve waldner
Well-Known Member
Tracks are brand new oem ,sprockets are brand new 20 hrs
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Pc360lc-10 final drive slop
- Thread starter steve waldner
- Start date
steve waldner
Well-Known Member
All pin and bushings on boom -stick- bucket are brand new , oem .
steve waldner
Well-Known Member
Swing Bearing is brand new.
Iworkondiggers
Member
Doesn't appear to be much movement in the final drive, looks more chain to me, looks a bit loose too, should be 10-30mm of deflection from the front idler to first carrier roller.
How tight are those cover bolts too by the way, as they retain the ring gear
How tight are those cover bolts too by the way, as they retain the ring gear
Tones
Senior Member
- Joined
- Mar 15, 2009
- Messages
- 3,085
- Location
- Ubique
- Occupation
- Ex land clearing contractor, part-time retired
When you replaced the track chains did you check the tension springs and the bolts at go through them? If either are broken they will cause movement like that. an easy way of checking is to pull the dipper with the bucket in the ground and over the idlers and see if the idlers are retracting into the frame.