• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Help with Case Track Loader

Lantis

New Member
Joined
Apr 21, 2021
Messages
1
Location
Oregon
Hello all,
I have been struggling for a week trying to get my skid steer back into operation.

Backstory is I got stuck out of state for two months and the skid got infested with mice.

I have a 9406 code on the tr340. I have taken apart the whole cab to expose wires and I replaced two under the seat that I could reach. Is it possible this code is from other wires under the seat?

I have tried to jump the power and eh module to no success. It still prompts me to start when I sit on the seat and runs fine (aside from no hydraulic controls working)

I realize at this point I probably have to tilt the cab. I think I am going to buy a gentry crane from HF to do this since I don’t have an excavator or other heavy equipment that can reach it.

For the TR340 in a ‘15 flavor will the arm raise if the emergency down button is held or do I have to remove the hydraulic line most likely?

Thank you very much. This has been a frustrating experience. Last year I had a major hydraulic line bust and got a bill for 3k from the dealer so I really really don’t want to use them again.

Erik
 

KSSS

Senior Member
Joined
Feb 27, 2005
Messages
4,319
Location
Idaho
Occupation
excavation
If you pull up on the that red button on the right side you can raise the loader arms. Did you find out what 9406 code means?
 

fencefool

Well-Known Member
Joined
Mar 18, 2012
Messages
48
Location
California
Code 9406--No CAN Communication from VCM

I have the same machine. Have you figured out any tricks to keep the mice out? Mine sits one jobs for awhile too.
 
Top