Slowly moving through greasing all of the joints on the hoe. Had a problem with one outrigger, but people suggested I take pressure off before trying again.
I did that, and one took grease. The other did not.
The hydraulic cylinder moves on the pin. The pin moves. Very light rust. If I take the Zerk off, I can pump grease through the zerk
Removed the Zerk, and flushed the joint out with penetrating fluid. Same with the cylinder to pin area.
Any ideas?
I did that, and one took grease. The other did not.
The hydraulic cylinder moves on the pin. The pin moves. Very light rust. If I take the Zerk off, I can pump grease through the zerk
Removed the Zerk, and flushed the joint out with penetrating fluid. Same with the cylinder to pin area.
Any ideas?