colson04
Senior Member
Well, I need some help.
My JLG 45HA 2WD is stuck in a customer's driveway. I loaded lift from job at at 10am. Machine drove fine, no issues loading up. On my way home, I stopped at customer B's house for a quick 30 minute job. Unloaded, drove to site, performed work, drove back to trailer. My drive wheels just hit the bottom of the ramp when it stopped with a jolt and would not go any farther forward. I tried backing up, I moved about a foot and I noticed the right drive wheel lock up. I drove forward, it rolled free and then locked up again after a foot. I proceeded to flip the center cap, driving the pin inwards, felt machine release like it wasn't connected and tried to drive again, still no drive. Used customers truck to drag machine completely off the trailer. 3 wheels roll free, 4th won't turn. I left to go get tools and bobcat to help push machine onto trailer.
What do you think I need to release on that wheel so it can roll? What might be causing it to bind/hang up?? Once its free I should be able to push the machine onto the trailer to get it home. for further investigation.
Any ideas or insight greatly appreciated. I'll update with pictures as I get things apart.
My JLG 45HA 2WD is stuck in a customer's driveway. I loaded lift from job at at 10am. Machine drove fine, no issues loading up. On my way home, I stopped at customer B's house for a quick 30 minute job. Unloaded, drove to site, performed work, drove back to trailer. My drive wheels just hit the bottom of the ramp when it stopped with a jolt and would not go any farther forward. I tried backing up, I moved about a foot and I noticed the right drive wheel lock up. I drove forward, it rolled free and then locked up again after a foot. I proceeded to flip the center cap, driving the pin inwards, felt machine release like it wasn't connected and tried to drive again, still no drive. Used customers truck to drag machine completely off the trailer. 3 wheels roll free, 4th won't turn. I left to go get tools and bobcat to help push machine onto trailer.
What do you think I need to release on that wheel so it can roll? What might be causing it to bind/hang up?? Once its free I should be able to push the machine onto the trailer to get it home. for further investigation.
Any ideas or insight greatly appreciated. I'll update with pictures as I get things apart.