-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Ripper or No Ripper
- Thread starter KES2020
- Start date
Nige
Senior Member
I agree with the balance. The tractor is going to be awful nose-heavy with the ripper removed and with it not being a high-drive model traction will undoubtedly suffer.
John C.
Senior Member
I don't think you could actually measure a difference in fuel burn between a machine with a ripper against one without it. Take the ripper off and it will make it so the tracks spin easier and likely take longer to move the same amount of material and wear faster on the undercarriage.
firedozer
Active Member
Not to mention. the ripper provides very good rear area protection in clearing applications.
Very sturdy back bumper that one can use if needed for backing into things.
Very sturdy back bumper that one can use if needed for backing into things.
He was just making the point that rather than run bareback, owners will put weights on the back to improve balance. Since the ripper came with the machine, bonus. They will use it, believe me, lol.
skyking1
Senior Member
I have not worked a bare 8K, but I would imagine it would just as nose-heavy as the rest without a winch or ripper.
You can use a single shank to tear out big roots too.
You can use a single shank to tear out big roots too.
JPV
Senior Member
Keep the ripper for balance and for when you need it (you will at some point). The only reason I could think of to take it off is if you were trying to tow some kind of implement off the draw bar or something.
exactly
Bls repair
Senior Member
If you take off the ripper today ,you will need it tomorrow 
boaterri
Well-Known Member
Not to mention that you can use the riper frame to lift the rear of the machine if you get stuck, or need to do maintenance on that end of the dozer.
Tinkerer
Senior Member
So, Is there difference in a D8K that came from the factory without a ripper and one that did ?
I put a lot of hours on ones that never had a ripper on them and they didn't seem nose heavy.
At least in respect to cause it to sink in in soft or wet soil when lifting the blade.
I would love to operate one that had a ripper removed, just to see and feel the difference.
I put a lot of hours on ones that never had a ripper on them and they didn't seem nose heavy.
At least in respect to cause it to sink in in soft or wet soil when lifting the blade.
I would love to operate one that had a ripper removed, just to see and feel the difference.
skyking1
Senior Member
I know the four barrels saved my butt on a nine that I had "inconvenienced."
cuttin edge
Senior Member
Is an 8 oval track as front heavy as a high track 8 without a ripper?
Tinkerer
Senior Member
The pre high track 8's I ran were definitely more nose heavy.
I thought I died and went to heaven when I was assigned to my first brand new D8N.
We put a D8k blade to blade with that 8N and the K pushed it backwards like it wasn't even there !
My apologizes to the OP for going off the subject of his thread.
I'm done here.
I thought I died and went to heaven when I was assigned to my first brand new D8N.
We put a D8k blade to blade with that 8N and the K pushed it backwards like it wasn't even there !
My apologizes to the OP for going off the subject of his thread.
I'm done here.