-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
hitachi zaxis 470 starting problem
- Thread starter abedsunna
- Start date
Midnightmoon
Senior Member
Next time dont use eather and pump the primer valve for fuel system until it's hard and try starting. If it starts easier you have a leak in the fuel system and your loosing the prime overnight. A hole in the return line or supply line, loose fuel filter, loose hose clamp. You wont see a viable leak
Midnightmoon
Senior Member
Does the primer get hard? You have to pump it 50+ times to over come a potential leak. How many hours on the machine. Some systems have check valves that go bad in the fuel system. What's the serial number
mg2361
Senior Member
Post a picture of your instrument panel.
this
Attachments
mg2361
Senior Member
mg2361
Senior Member
Not for the engine.
mg2361
Senior Member
172-3 Intake Air Temperature Fault (Voltage too high, above 4.95V)
14006-2 Satellite Communication Terminal communication error
14006-2 Satellite Communication Terminal communication error
hello friend
any idea what to test , i removed the injectors and send it for testing . it was not working so we fixed them but now it not working even with eather before fix the injectors and after
it looks have ni power coming to the injectors
good morning
i do one try
i put the stop switch under the operator chair to off mode and do trigger the starter motor manually , the engine start . but once i put the switch no normal mode the engine stopped and the starter motor wont trigger from the starting key
i do one try
i put the stop switch under the operator chair to off mode and do trigger the starter motor manually , the engine start . but once i put the switch no normal mode the engine stopped and the starter motor wont trigger from the starting key