I would like to thank you for all the work you and anyone else has done on this. Y'all are gentlemen and scholars.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Pin-on Bucket Mounting Specs
- Thread starter StumpyWally
- Start date
StumpyWally
Senior Member
- Joined
- Oct 21, 2011
- Messages
- 516
- Occupation
- PE Civil Eng'r, Computer Sys. Mgr., Retired
Here is the newest & latest version or 02/22/2021.
https://docs.google.com/spreadsheets/d/1iADUG1u3sejvlJkQA9wk6g11dxvWuv0SpPUk8iBKnlQ/edit?usp=sharing
I've incorporated the many John Deere & Hitachi machines & dimensions that were kindly provided by JS Myers. It took me a couple of hours, & I think I'm now a little google-eyed...but it's a useful past time while it's snowing...again!!
https://docs.google.com/spreadsheets/d/1iADUG1u3sejvlJkQA9wk6g11dxvWuv0SpPUk8iBKnlQ/edit?usp=sharing
I've incorporated the many John Deere & Hitachi machines & dimensions that were kindly provided by JS Myers. It took me a couple of hours, & I think I'm now a little google-eyed...but it's a useful past time while it's snowing...again!!
StumpyWally
Senior Member
- Joined
- Oct 21, 2011
- Messages
- 516
- Occupation
- PE Civil Eng'r, Computer Sys. Mgr., Retired
In my post #106, I may have posted a link that does not have sufficient access. Sorry about that....
So, here is a corrected link to the newest & latest version of 02/22/2021:
So, here is a corrected link to the newest & latest version of 02/22/2021:
Erik Goslawski
New Member
Just want to say a big thank you to those that have contributed to this blog. I work for a OEM and we are designing a new size mini excavator. This will be a clean sheet design and we don't even have this information. Leave it to the guys in the trenches to get this figured out!!! Thanks again.
You are a good man, sir!
Beau Leitzen
New Member
Thats some useful data. great job
is there not data for pc88mr-10?
..maybe its the same as the pc78-6
is there not data for pc88mr-10?
..maybe its the same as the pc78-6
Andreas2808
New Member
Hello,
The list is really great! Thank you to the creator!
In the "Atlas" section, however, it looks a bit poor. Bolt diameter 100mm for for 1602 can not be.
Should be as follows: 12XX: 50mm, from 13XX: 60mm, from 18XX: 80mm
XX= 02 or 04.
Stick width is also not correct in line 35 and 36.
1804 stick width should be 350mm (long front).
The list is really great! Thank you to the creator!
In the "Atlas" section, however, it looks a bit poor. Bolt diameter 100mm for for 1602 can not be.
Should be as follows: 12XX: 50mm, from 13XX: 60mm, from 18XX: 80mm
XX= 02 or 04.
Stick width is also not correct in line 35 and 36.
1804 stick width should be 350mm (long front).
Hi, does anyone knows if CAT 320 B linakge bucket can be used on John Deere 210G machine?
Seems the pin diameters are the same, 80mm, the width is a little bit off, 311 for CAT and 307 for John deere, pin center is different CAT at 445 mm and John deere at 476 mm but I believe that only changes to the digging angle, still able to use the bucket?
Seems the pin diameters are the same, 80mm, the width is a little bit off, 311 for CAT and 307 for John deere, pin center is different CAT at 445 mm and John deere at 476 mm but I believe that only changes to the digging angle, still able to use the bucket?
earthscratcher
Senior Member
yes the 320 b linkage bucket will work, it might need up to 1.75 inches of shims if its the wider eared cat bucket