• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Pc360-10 rebuild

V

Volvomad

Senior Member
Joined
Jul 13, 2011
Messages
476
Location
Ireland
Thanks john c. Hand welding the bore by the cab brought new meaning to out of position welding. Weighed the boom after removing and is 2T even. Is a 210 machine. Have it half bored but got sidetracked.
 
John C.

John C.

Senior Member
Joined
Jun 11, 2007
Messages
12,870
Location
Northwest
Occupation
Machinery & Equipment Appraiser
I used to do a bit of that hand welding with stick early in my career. I did a couple with hard wire when I worked at the Komatsu dealer. It went real fast in that case but looked pretty rough when I was done. The machinist said don't worry, I can take it out faster that you can put it in.
 
steve waldner

steve waldner

Well-Known Member
Joined
Jul 5, 2017
Messages
192
Location
huron sd
John C. said:
I used to do a bit of that hand welding with stick early in my career. I did a couple with hard wire when I worked at the Komatsu dealer. It went real fast in that case but looked pretty rough when I was done. The machinist said don't worry, I can take it out faster that you can put it in.
Click to expand...
Lol ! That’s is so true , I had to redo one of mine , took 4min to take out , takes 1/2 hr to weld .
 
You must log in or register to reply here.
Top