Machine: Samsung SE210-2Pump: Kawasaki K3V112DT-1RCR
My hydraulic schematic shows 2 x screen filters in the pilot circuits at 24 & 25. I’m assuming 25 is in the pilot gear pump? And if so should I tackle it from the discharge port?
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Can’t locate ‘screen filters’
- Thread starter Lagwagon
- Start date
Machine: Samsung SE210-2Pump: Kawasaki K3V112DT-1RCR
My hydraulic schematic shows 2 x screen filters in the pilot circuits at 24 & 25. I’m assuming 25 is in the pilot gear pump? And if so should I tackle it from the discharge port?
uffex
Senior Member
Good day Lagwagon
I believe you are subject to some low quality hydraulic schematics, 24 is located in the servo pump at the head of the relief valve see attached those others are simply screen filters in the actual nipples that attach the tubes.
Kind regards
Uffex
I believe you are subject to some low quality hydraulic schematics, 24 is located in the servo pump at the head of the relief valve see attached those others are simply screen filters in the actual nipples that attach the tubes.
Kind regards
Uffex