leojmartin
Member
I have completed the simple checks with voltmeter recommended in the manual. I still have a fault code 4533. Is there a test device to check the joystick while removed from the machine. The machine is a couple of miles down a ATV trail so access is limited.
I suspect there are more checks that I can perform but I don't have the instructions for those test.
We are currently experiencing a hurricane so it will definitely be next week sometime before I can get back to the machine. However, I removed the joystick when I was at the machine last. I was hoping I could take it to the dealer for testing.
The machine was operated for a couple of days prior to having the fault code. The machine was acting like it had fuel problems so it was parked while I purchased a new fuel filter.2 days later I replace the fuel filter. I did find some water in the in-line filter. After changing the filter the machine started and runs fine. the blade moves fine.
The transmission fault alarm is on and won't clear.
Can someone provide more thourogh test procedure.
Thanks
Leo Martin
I suspect there are more checks that I can perform but I don't have the instructions for those test.
We are currently experiencing a hurricane so it will definitely be next week sometime before I can get back to the machine. However, I removed the joystick when I was at the machine last. I was hoping I could take it to the dealer for testing.
The machine was operated for a couple of days prior to having the fault code. The machine was acting like it had fuel problems so it was parked while I purchased a new fuel filter.2 days later I replace the fuel filter. I did find some water in the in-line filter. After changing the filter the machine started and runs fine. the blade moves fine.
The transmission fault alarm is on and won't clear.
Can someone provide more thourogh test procedure.
Thanks
Leo Martin