-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
D6C part number
- Thread starter D6Cat
- Start date
Nige
Senior Member
To identify parts on the tank would require the Serial Number of the Hydraulic Control.
Fortunately that S/No is right there on the tank itself - or should be if it has not gone missing.
Fortunately that S/No is right there on the tank itself - or should be if it has not gone missing.
Nige
Senior Member
Close. The options for the first three digits are 39F, 39G, or 39X. Could the "6" be a "G" do you think..?
Can you post your photo again.? It doesn't show up now.
Can you post your photo again.? It doesn't show up now.
Last edited:
Old Magnet
Senior Member
Looks like you need elbow 3P1288
kshansen
Senior Member
- Joined
- Mar 11, 2012
- Messages
- 11,165
- Location
- Central New York, USA
- Occupation
- Retired Mechanic in Stone Quarry
Well here's a picture out of the parts book on SIS that shows that 3P1288 as item # 7 in the drawing:
And this is what the NPR says: Discontinued but does give a phone number to try:
Then again if there is a place that is parting out Cat equipment you might get lucky and find a good used one, what's wrong with your's?
Old Magnet
Senior Member
Do a parts check on www.machinerytrader.com, they show several available.
Welder Dave
Senior Member
Looks like there's a big chunk broke out of it below the 90.