Bertrrr
Well-Known Member
Got this machine working pretty good , been sitting for a few days , had to charge the batteries to get it started but all sounded good, cannot get any of the hydraulics to respond even with the safety latch pushed all the way down,
Will look at that micro switch tomorrow to see if that is the culprit , had to add about 4 gallons of hyd oil to the reservoir and thought that was the problem,
Am I missing something ? this is an OLD machine with numerous wires cut, bypassed etc. but it was running fine when I parked it and shut it down a few days ago.
thanks for any info you guys may have,
Will look at that micro switch tomorrow to see if that is the culprit , had to add about 4 gallons of hyd oil to the reservoir and thought that was the problem,
Am I missing something ? this is an OLD machine with numerous wires cut, bypassed etc. but it was running fine when I parked it and shut it down a few days ago.
thanks for any info you guys may have,