• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Wear strips on Extenda Hoe Case 580K

J

Joe Friday

Well-Known Member
Joined
Jan 13, 2020
Messages
54
Location
Pleasantville IA
Well, getting around to finally using my 580 K Extenda Hoe Series 1. Awfully wet to try and get any real work done. But the one thing I noticed is that the extenda boom section is extremely loose when extended. Who has replaced the wear strips? Do you have pictures? Where did you buy the strips? Does anyone have the dimensions of the strips? Are they Teflon?

Thanks in advance!
 
Coy Lancaster

Coy Lancaster

Senior Member
Joined
Dec 19, 2014
Messages
1,987
Location
Arkansas
Occupation
service tech
There are no wear strips on the inner part of the dipper. It's shimmed with fiber plates and shims on end of dipper. Check your parts book for correct shims and plates.
 
J

Joe Friday

Well-Known Member
Joined
Jan 13, 2020
Messages
54
Location
Pleasantville IA
upload_2020-5-27_20-35-43.png
So it looks like you can only see the wear plates when disassembled? Anyway to tell if they are still in there without disassembly?
 
You must log in or register to reply here.
Top