-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
case 9010 B computer not powering up
- Thread starter ebohy
- Start date
laycobeau
Well-Known Member
- Joined
- Jul 8, 2013
- Messages
- 219
- Location
- Tulsa Ok. beau.bowlan@lei-corp.com
- Occupation
- Lead electronic technician
Are you sure about power and ground into the monitor? I think some of those may have a fuse inside. Sounds like broken(loose) wire or blown fuse.
Of course I've been wrong about half the time this year.
Of course I've been wrong about half the time this year.
I have power to the monitor even when the key is off thats why I looked at the computer to see if it was powering up but when I saw the window on it with no lights on I thought maybee it sends a singnal to power up the monitor I need to find a wiring diagram for it
laycobeau
Well-Known Member
- Joined
- Jul 8, 2013
- Messages
- 219
- Location
- Tulsa Ok. beau.bowlan@lei-corp.com
- Occupation
- Lead electronic technician
What are you using for a ground to measure your voltage. connector or the frame? They may be using a ground to enable.
I was using the frame for my ground I finally got more info on the power to the controller and it should have a red and a green light on in the window so now Im looking at the power and ground to it but i wont get to it for another week at least thanks for all your help