• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Deutz f3l 1011 Blowing oil from exhaust

92U 3406

92U 3406

Senior Member
Joined
Jan 3, 2017
Messages
3,160
Location
Western Canuckistan
Occupation
Wrench Bender
Check your exhaust valve seals. Those POS seals ALWAYS seem to pop off. Would be replacing those stupid things all the time.
 
A

Anthony Poole

Member
Joined
Feb 7, 2019
Messages
20
Location
Magnolia, TX
Manifold off. Pulled head again. Seemed to have carbon and oil too far out in head gasket. With head off put about inch of kerosine in the cylinders. #2 leaked out in about 15 min. I know this isnt leakdown, but shows rings not sealing. So looks like ring job. Which unfortunatly in welder means seperating machine just to get oilpan out.
 
A

Anthony Poole

Member
Joined
Feb 7, 2019
Messages
20
Location
Magnolia, TX
Sorry took so long to come back with update. Once oil pan dropped found 1 1/2" sand in bottom of pan. It appears welder ran in a dusty enviro with out air filter or oil change, if ever. Found oil rings flat due to grit in oil.
 
You must log in or register to reply here.
Top