Joe Friday
Well-Known Member
Thanks! Switches are $50 - $90 but waterproof generic switches off eBay are $6-$10 in 5/8” mounts.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Case 580K won’t move
- Thread starter Joe Friday
- Start date
Tinkerer
Senior Member
I removed a worthless comment about switches on EBay that was here.
laycobeau
Well-Known Member
- Joined
- Jul 8, 2013
- Messages
- 219
- Location
- Tulsa Ok. beau.bowlan@lei-corp.com
- Occupation
- Lead electronic technician
Looks like an Otto P3- series here in link to measure to see they are 5 t0 10 amps https://www.otto-controls.com/-/media/products/literature/P3-Product-Bulletin.ashx
Willie B
Senior Member
Torque converter problem?
Should have a declutch button on the shift lever & on the loader control. That wiring controls the little can on the shuttle others have described. I believe you power it to stop the transmission. Mine didn't work. Wiring was a mess & I replaced the solenoid.
Most of these torque converters leak. If it has been run low on iol it may have a bad torque converter.
Should have a declutch button on the shift lever & on the loader control. That wiring controls the little can on the shuttle others have described. I believe you power it to stop the transmission. Mine didn't work. Wiring was a mess & I replaced the solenoid.
Most of these torque converters leak. If it has been run low on iol it may have a bad torque converter.
Joe Friday
Well-Known Member
It definitely was the switch. It ran 19 mph down the highway with fluid in the tires.