• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Gave my D6 a little love

O

One guy construction

Well-Known Member
Joined
Apr 11, 2017
Messages
83
Location
S.W. Pa
Occupation
Owner/Welder, Hobby Land management
Finally I have a post without asking about a problem.. My paint shop was a little slow so I brought my dozer in for some tlc. Paint was just faded some and had typical scratches but no dents. Gave it a paint job and I swapped out the cable that was on it and put a smaller one and cable chokers on. Made a holder for the chokers. Was gonna make a high roller like the real loggers have but for no more than i will be use it this will be fine. Got my new building done so everything will be inside now Ive been trying to clean them up.IMG_2439.jpg IMG_2494.jpg
 
F

Fletcher

Member
Joined
Sep 20, 2018
Messages
22
Location
Ontario
Nice setup. I am going to do something similar with my old d6b. Can you report back how well the cable holder is working in the Bush? With your winch brake are you able to keep 4 log ends up high enough to skid out without too much trouble?
 
O

One guy construction

Well-Known Member
Joined
Apr 11, 2017
Messages
83
Location
S.W. Pa
Occupation
Owner/Welder, Hobby Land management
Fletcher said:
Nice setup. I am going to do something similar with my old d6b. Can you report back how well the cable holder is working in the Bush? With your winch brake are you able to keep 4 log ends up high enough to skid out without too much trouble?
Click to expand...
If I was going to be doing a lot of skidding I would add the top roller to lift up the logs ends more so to save the choker wear and less rutting of the roads. I don’t have much logging to do and I was using the original 3/4 cable with hook and several choker chains. It drug 4-5 logs behind it like it wasn’t anything there. Just wasn’t pretty. I only really Ned to skid logs up over steep banks from where I’m widening/daylighting roads. My fields that I’m making I just stack and load with excavator
 
Nige

Nige

Senior Member
Joined
Jun 22, 2011
Messages
29,379
Location
G..G..G..Granville.........!! Fetch your cloth.
One guy construction said:
Thanks. Just finished it up till spring then the floor will get done
Click to expand...
A suggestion if you plan on laying a concrete floor. See if you can get hold of some scrap lengths of railroad track and cast them into the floor with about 1/4" or a hair more of the rail head showing above the finished surface level. It keeps the grousers of the track shoes from ripping up the concrete.
 
C

cuttin edge

Senior Member
Joined
Nov 9, 2014
Messages
2,736
Location
NB Canada
Occupation
Finish grader operator
The former paper mill here had a D6 at it's dump site. When not in use, it was kept in a building. The floor was poured with two hardwood strips like the deck of a float. It could be changed but as far as I know, it lasted at least 15 years, until the mill shut down
 
W

Welder Dave

Senior Member
Joined
Oct 11, 2014
Messages
12,540
Location
Canada
I think conveyor belting would be a good option for the floor. It could be easily removed if you need the space for something else and/or you need the floor flat. If you had to use a jack or something else with wheels a rail sticking up might pose a problem.
 
Nige

Nige

Senior Member
Joined
Jun 22, 2011
Messages
29,379
Location
G..G..G..Granville.........!! Fetch your cloth.
Pretty much every shop I've ever worked in had rails set into the floor in the tractor bays. Do it right with around 1/8-1/4" of rail showing above the concrete and it's not even a trip hazard, let alone something that would bugger you up using a jack. Just because there are rails set in the floor doesn't mean to say that rubber-tyred equipment can't use it.
 
W

Welder Dave

Senior Member
Joined
Oct 11, 2014
Messages
12,540
Location
Canada
I've seen rails in shops that a large portion of their work is on crawler tractors which makes sense. This looks to be on a farm where there would be a multitude of uses for the building. Maybe I'm thinking about if I was fabricating or repairing something where I needed a large flat floor.
 
DMiller

DMiller

Senior Member
Joined
Feb 21, 2010
Messages
16,579
Location
Hermann, Missouri
Occupation
Cheap "old" Geezer
We had rails set in one shop floor, as noted were 1/8-1/4" above the concrete after finish as well they had been left Exposed so could use the Rail Head for a Tie Down, we used them for trailer alignment work straightening Operator Errors.
 
kshansen

kshansen

Senior Member
Joined
Mar 11, 2012
Messages
11,165
Location
Central New York, USA
Occupation
Retired Mechanic in Stone Quarry
One guy construction said:
I am putting radiant heat in the floor and since I have access to large stainless steel plates 8'X22' 3/16 thick, I will just lay those down in the bays that I will be driving in on. This is on my farm so its not heavy use in or out.
Click to expand...
Never had the chance to work in shop with the radiant heat but a guy I worked with did some moonlighting work for a local place that had it in a small one bay shop. He said on a cold day it was almost too nice to be laying on creeper under a machine!

Was told once that they had considered using that in the shop I spent 40+ years working in when it was built in the early 1970's but they opted to go with two 500,000 BTU fuel oil forced air heaters and regretted it several years later when fuel prices jumped! They did eventually switch to used oil heater but they can be a hassle if you are not up on the maintenance or let anyone dump crappy oil in the tank.

I do have it in two bathrooms in the house and sure feels nice on a cold morning in the winter!
 
C

cuttin edge

Senior Member
Joined
Nov 9, 2014
Messages
2,736
Location
NB Canada
Occupation
Finish grader operator
kshansen said:
Never had the chance to work in shop with the radiant heat but a guy I worked with did some moonlighting work for a local place that had it in a small one bay shop. He said on a cold day it was almost too nice to be laying on creeper under a machine!

Was told once that they had considered using that in the shop I spent 40+ years working in when it was built in the early 1970's but they opted to go with two 500,000 BTU fuel oil forced air heaters and regretted it several years later when fuel prices jumped! They did eventually switch to used oil heater but they can be a hassle if you are not up on the maintenance or let anyone dump crappy oil in the tank.

I do have it in two bathrooms in the house and sure feels nice on a cold morning in the winter!
Click to expand...
What I like about it is the recovery time. Open the overhead door and take a loader out, and it is no time warming back up. The floor dries fast too. Only thing, if someone cranks the thermostat, it takes a while to cool off
 
O

One guy construction

Well-Known Member
Joined
Apr 11, 2017
Messages
83
Location
S.W. Pa
Occupation
Owner/Welder, Hobby Land management
I first put it in my house and my garage. Then I did new addition at my shop 40,000 sq ft. Employees love it. I will not do a floor with out at least making provisions for in floor heat.
 
You must log in or register to reply here.
Top