• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Komatsu D31PX-21 Ser. #51474

GODSDOZER

Well-Known Member
Joined
Jan 7, 2011
Messages
134
Location
East Texas
Occupation
Dirt Contractor
Are there any Komatsu guys on here or just mainly Cat? 80 views and no replies :)
 

John C.

Senior Member
Joined
Jun 11, 2007
Messages
12,865
Location
Northwest
Occupation
Machinery & Equipment Appraiser
Lot of older gents and too few of these machines in the industry for a base of experience. We had so few problems with the small rice burners when I was working for the dealers that we never saw them again after the delivery checks were finished. You are going to need a service manual.
 

bam1968

Senior Member
Joined
Nov 1, 2014
Messages
528
Location
IA
Occupation
Excavating Contractor
I'm not sure if this applies to your machine but that code on a D65EX-15 is a disconnect in the shift up switch. IIRC when I had this code come up I don't recall the screen going blank. But the problem ended up being a wire being broke in the steering handle. Actually it was just below the steering handle at it's pivot point. I would assume that code would be the same for all models of dozers but I don't know that for sure. Good Luck
 

DK88

Senior Member
Joined
Jan 19, 2011
Messages
320
Location
Ontario
Occupation
Field service tech.
lift up the boot around the f-n-r lever, open up the clear tube over the wires and odds are one off the wires got caught on the corner of the block that the lever is bolted to and ripped the wires, very, very very common. just give the wires a little pull, on ocasion the wire wont be severed but the copper core will be.
 
Top