Pro and cons of Clark clg55 please help

Looking to buy forklift Clark clg55 can I still get parts for it ? My forklift mechanic says he only seen two in his whole career ? Any info would be great . Tia

Has CGP55 on overhead guard. Appears to be on LP gas by tank on back.
Pic of the data plate showing actual model/serial number would enable help.
Would depend on what parts you might need.

It's a cgp55 yes it's a lp truck has Chevy v6 in it don't need any parts yet but want to know if it's a good buy I don't use it a lot have a welding and fabrication shop

"Good buy" would depend on a MAJORITY of the following:
You have access/possession to use/test out, everything seems to work.
Knowledge of where it came from-Past use/maintenance/treatment as to weather exposure.
Is its size, down height/lift height,and capacity suitable for where you will want to run it.
How much the owner wants for it.
One sold 9/18/19, with 9970 hours for $6500.00
Another sold 6/6/18, with 1712 hours for $5,750.00.
Hr meter reading are relative... We figure 2,000 hours a year on a machine used in a
production environment, 8 to 5, 5 days a week. No hour meter numbers should be
taken as gospel.
All that said, the pics looks like a better that average machine appearance/condition.
Seat used, but intact and not NEW. Triple stage upright and whatever attachment is
a plus from a "vanilla" truck. Headlights, mirrors not banged up. paint in "good" condition.

There is some references to "discontinued". Could mean just no longer produce(model change),
problem truck, etc. Send me an email address to: forktruck@yahoo.com.
I will be getting some specific info on its SN and fwd to you / 2 or 3 days.
Cheers

Thanks for the help I tried to email you but yahoo says they blocked me my email is metallineaz@gmail.Com look forward to your info

I appreciate your help a lot , I can't wait to see the info you have on this forklift . I have used this forklift for about 6 months in my shop and have had no problems with it my friend buys and sells forklift and he bought it and shipped it to me so I could use it until he found me another one a little smaller but I fell in love with it and love the capacity of it not that i use it all but nice to have I mostly use it in my shop to unload steel and to load gates and such and more also I do some commercial welding and Fabrication and get into big projects sometimes . I checked the oil when I got it and it was good looks like it's going to need a radiator soon and it has some rust in places but not to bad I don't remember the hours on it but i can look tomorrow . The owners wants 7800.00 for it he originally wanted 10,000 and that was too much for me and he is taking a deposit then letting me make 12 monthly payments. Also I would like to service it soon would like to know what I should do obviously plugs wires cap and rotor change oil . Possibly change hydraulic fluid if that's possible or needed any info would be great thanks also want to paint it and clean it up

Here is my smoker project I'm building with it too .

Thousand dollars of smoker... Takes a millions dollars worth of meat...LOL Sharp fab there.

Info obtained e mailed today. Your e mail address added to my contacts and should allow you in now.
Please acknowledge on it to confirm.

I just sent email again and still got blocked

OK. Got the block corrected and have obtained and sent detailed info on the machine from a Clark source.
We can go from here on anything further you need.