CATinLiberia
Active Member
- Joined
- Aug 14, 2012
- Messages
- 26
- Location
- Liberia, West Africa
- Occupation
- Missionary and Community Development
I am looking for a hydraulic schematic for my 420D.
I recently hired a local mechanic to remove and reinstall all my hydraulic cylinders to have them rebuilt. When he reinstalled the two excavator swing cylinders, he must have switched up the hoses, so it wouldn't move left or right. After only a few minutes with the engine running, fluid started pouring out from below the RH excavator control. I assume the two cylinders were pressurizing against each other. So, before I can do anything else, I need to get the four swing arm hoses straightened out.
Also, any ideas on what blew out in the control would also be helpful!
Thanks!
Eric
I recently hired a local mechanic to remove and reinstall all my hydraulic cylinders to have them rebuilt. When he reinstalled the two excavator swing cylinders, he must have switched up the hoses, so it wouldn't move left or right. After only a few minutes with the engine running, fluid started pouring out from below the RH excavator control. I assume the two cylinders were pressurizing against each other. So, before I can do anything else, I need to get the four swing arm hoses straightened out.
Also, any ideas on what blew out in the control would also be helpful!
Thanks!
Eric