• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Bobcat 773 with Kubota v2203 engine .... Installing a block heater....

apehf

Member
Joined
Oct 2, 2010
Messages
17
Location
Sherbrooke
Occupation
Sheperd
Howdy!! I am planning on installing a block heater on my 773 and would like some assistance/coaching as to how to proceed. I have a Philiiips &Temco 3100025 block heater. So where do I install it on the block? Thank you in advance for your help!!!
 

Delmer

Senior Member
Joined
Jan 3, 2013
Messages
8,865
Location
WI
I woke up in a cold sweat because I forgot to tell you: point the element a little to the right of straight up, so the metal doesn't touch metal. And hurry, it looks like you're five minutes too late already!:D
 

DIYDAVE

Senior Member
Joined
Feb 18, 2007
Messages
2,410
Location
MD
Sometimes the location can be a bear, to get the old FP out, specially if there is a firewall, in the way... I remember on one, I drilled a hole, to get the bar of a slide hammer in, then used a drill, to drill a small hole, in the FP, and put the screw, of the dent puller in the hole, screwed it in, and yanked the FP out, with the dent puller/slide hammer... ;)
 
Top