John Mathis
New Member
I have a 2012 John Deere 27D excavator. I need an operations manual. Nothing for sale on line. Help?
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
New to me deere 27D.....my first excavator
- Thread starter eganx
- Start date
mg2361
Senior Member
tool_king
Senior Member
What is you email address ? I will send you one.
Seand83
New Member
Looking for operator and service manuals for a 2012 John Deere 27D if anyone has them. Thanks!
tool_king
Senior Member
Sean what is your email address ?
Seand83
New Member
tool_king
Senior Member
Ok great I will send when I get to shop in morning.Typing from a tablet .
MasterofDiaster221
Member
looking for service manual for a john deere 35zts.
rickTucson
Member
I just got a used 27d and like to get the operators, service, and parts manuals.
tool_king
Senior Member
Rick what's your email address ?
DaveGroundlevel
New Member
I am looking for a manual for a John Deere 27D as well. Are you still emailing those? my email is dave@groundlevelexcavating.com Thanks so much!
tool_king
Senior Member
Manuals were emailed to you .
Greg D
New Member
I just bought a 50D I could sure use a manual. Also my steering lever is sticking. any ideas? greg_duke39059@yahoo.com thanks in advance.
mg2361
Senior Member
Welcome to HEF GregD
! Should have started a new post rather than piggy back an old one. Your sticking lever is probably dirt packed down around the travel pilot control valve under the front floor board. As far as manuals you will have to either buy one or PM tool_king to see if he any to share.
! Should have started a new post rather than piggy back an old one. Your sticking lever is probably dirt packed down around the travel pilot control valve under the front floor board. As far as manuals you will have to either buy one or PM tool_king to see if he any to share.Greg D
New Member
Thank you, Sorry for the Piggy Back.
tool_king
Senior Member
Greg D
I emailed you set of manuals .
bigmacker
Member
New to forum and mini excavators (2012 J.D. 35D, 2000 hrs). My apologies for piggybacking. tool_ king is there any chance you could send me manuals for 35D? (bigmacker1245@gmail.com).
Also, I have two embarrassing newbie questions, 1) can i adjust the aux hydraulics (thumb) at the valve bank? which valve is it? it's way to fast right now, but will be using mower deck and need to adjust back to full flow as required. 2) how do i get constant flow to the mower motor without holding slide switch continually?
thanks for the help
Also, I have two embarrassing newbie questions, 1) can i adjust the aux hydraulics (thumb) at the valve bank? which valve is it? it's way to fast right now, but will be using mower deck and need to adjust back to full flow as required. 2) how do i get constant flow to the mower motor without holding slide switch continually?
thanks for the help
mg2361
Senior Member
Welcome to HEF bigmacker! Need a machine serial number.
Short answer is no you can't change flow without installing a flow selector kit or slowing down thumb operation with orifices installed in the thumb plumbing. You should be able to have constant auxiliary flow by pulling the trigger on the right lever instead of using the slide switch.
! Need a machine serial number.Short answer is no you can't change flow without installing a flow selector kit or slowing down thumb operation with orifices installed in the thumb plumbing. You should be able to have constant auxiliary flow by pulling the trigger on the right lever instead of using the slide switch.
bigmacker
Member
thx for the help, mg2361. serial #is 1FF035DXJCG269570
bigmacker
Member
any recommendations on flow selector kits for the 35D?