-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
pins and bushings
- Thread starter Twitchman
- Start date
DMiller
Senior Member
Easier to have a small machine shop make up a set and a set of spares.
farmerlund
Senior Member
Our local cat dealer (Butler) can search for bushings by size. odds are they can get what you need. There is a great web site some where in the HEF forums. Where you can search by size, but I can't find it.
DMiller
Senior Member
One little side note, if get replacement bushings, even as will fit pins out of the box will need align bored and sized to fit once installed as hole tends to shrink up once driven in place where also Not always square.
John C.
Senior Member
Have you checked at any bearing houses? Those dimensions sound pretty standard for a three inch pin. They can also give you some pointers on the type of materials that are available and how they will mate up with the pin material.
ACBJohn
Member
http://www.kset.com.au
I ordered bushing from them before for the same purpose - to adapt a bucket for trenching on my 205LC...Worked like a charm.
I ordered bushing from them before for the same purpose - to adapt a bucket for trenching on my 205LC...Worked like a charm.