BillG
Senior Member
Try this
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Snorkel tb60 issues
- Thread starter Snorkel issues
- Start date
Snorkel issues
Active Member
That work. And on one I googled its carb not fuel injected will that matter
BillG
Senior Member
Absolutely, carb engines don't have most of the electronics that TBI units do. Also with the ecm you need the correct manual for proper troubleshooting. And manuals are probably the cheapest parts that you can buy when you consider the alternative.
Snorkel issues
Active Member
I googled that model number and found a lift with that motor so I assumed it was it. I'll look at motor tomorrow and get exact info...also can I check the codes with personal computer and if so how do I connect it
BillG
Senior Member
No
Snorkel issues
Active Member
Is there a spec to define the blinking codes
BillG
Senior Member
Read the bulletin that I posted, everything is there. Codes, what it's associated with and how to count the flashes.
Snorkel issues
Active Member
I started searching right after I asked lol. Thanks for all the help. I know messing with me been like helping a 5 year old.
Snorkel issues
Active Member
New question we bought another lift same kind but diesel theres alot of movement in the body turrent. Is this gonna be a major fix
BillG
Senior Member
Well, I guess we are back to square one, model and serial.
Snorkel issues
Active Member
Lol. I'll have to look. Had it about a week. Runs good. No computer that's a plus.
Snorkel issues
Active Member
New question. Hiw hard it be to switch motors and get rid of computer
BillG
Senior Member
You are kidding correct? Let me give you a piece of advise "CALL A REPUTABLE DEALER". You are getting in way over your head and in danger of three things -
1. Spending a whole lot of $$$$ for nothing.
2. Making an otherwise usable piece of equipment dangerous.
3. Turning an otherwise usable piece of equipment into a scrapyard candidate.
Not only the above but after all of this you still have not supplied a serial number.
1. Spending a whole lot of $$$$ for nothing.
2. Making an otherwise usable piece of equipment dangerous.
3. Turning an otherwise usable piece of equipment into a scrapyard candidate.
Not only the above but after all of this you still have not supplied a serial number.
Snorkel issues
Active Member
983895...new question...we changed throttle body. Starts and runs. But now pedal wont work on platform. And you can use controls with out using pedal. Swapped out pedal with other lift pedal works and when you use controls without pedal it bogs down motor and kills it.