• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Case 440 Series 3 no start

M

marka683

Well-Known Member
Joined
Dec 1, 2015
Messages
82
Location
Chicago
Occupation
Mechanic
Unit died out while operating, will not crank, no power to fuel on solenoid. I have not worked on one of these any suggestions
 
KSSS

KSSS

Senior Member
Joined
Feb 27, 2005
Messages
4,333
Location
Idaho
Occupation
excavation
I would check the main power leads from the battery as well as battery. I replaced the power lead on my first Gen 440.
 
M

marka683

Well-Known Member
Joined
Dec 1, 2015
Messages
82
Location
Chicago
Occupation
Mechanic
Engine cranks if I jump power to the start lead, I assume it will run if I jump power to the run solenoid, it seems like something is locking it out. All fuses and relays in the fuse panel are good.
 
M

marka683

Well-Known Member
Joined
Dec 1, 2015
Messages
82
Location
Chicago
Occupation
Mechanic
Anybody please I'm struggling on this one. Does anyone have a schematic they would be willing to share?
 
alrman

alrman

Senior Member
Joined
Jun 20, 2009
Messages
3,308
Location
QLD Australia
Occupation
Diesel Fitter;Small Business Owner;Cleaner
If you have a pedal control auxiliary.
There is a "neutral start" switch fitted to the loader control valve at the 4in1 spool. - safety device ...... these often fail.
Well worth a look....... if you can get the loader frame up..........another engineering marvel.
 
You must log in or register to reply here.
Top