southernman13
Senior Member
Dip stick seems very short. Should the oil come up into the fill tube. On his one it would have to to reach it. Should it be checked running or of. Thanks
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
544H transmission oil
- Thread starter southernman13
- Start date
mg2361
Senior Member
From the 544H operator's manual.
heymccall
Senior Member
On my 544G machines, the dipstick seals the tube (with a twist compression seal). So, first removal of stick almost always shows nothing.
Remove stick, count to 10, reinsert, remove and check.
I think, to answer your question, yes, the oil level is "up" the fill tube a bit.
Remove stick, count to 10, reinsert, remove and check.
I think, to answer your question, yes, the oil level is "up" the fill tube a bit.
southernman13
Senior Member
Ok thanks. My son figured it out. Alls good!