• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

PC200LC-8 AC issues/manul

southernman13

Senior Member
Joined
May 13, 2008
Messages
1,114
Location
Florida,Ga,Tn
Occupation
Retired
Just got it. Blows Cold. It will run few minutes then the fan cuts off. The compressor will still be turning but blower motor not working. It will come back on. The Freon levels are good. Any ideas. Or manuals to be shared. Thanks
 

southernman13

Senior Member
Joined
May 13, 2008
Messages
1,114
Location
Florida,Ga,Tn
Occupation
Retired
Looks like relay may be bad. We’re working on it now. It seems to be different than the rest of them in there
 

John C.

Senior Member
Joined
Jun 11, 2007
Messages
12,865
Location
Northwest
Occupation
Machinery & Equipment Appraiser
A lot of problems I have had with excavator AC were that the filters are plugged and the blow motor is also packed up with dirt and debris. I used to pull all the plastic out of behind the seat and take turns with a shop vac and an air nozzle to clear out the mess. The doors for the ducting need the same thing.
 

southernman13

Senior Member
Joined
May 13, 2008
Messages
1,114
Location
Florida,Ga,Tn
Occupation
Retired
He jumped out the relay and it was working but not up to par. The blow motor was coming and going. It would just stop and then would blow again. Not making any noise but could hear it pulsating. It is dirty. Going to take a shop vac and clean as much as possible this morning. We ordered a new new relay and blow motor. Hopefully this will cure it. .
 
Top