• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Cat 262B Skid Steer Fuel Leak

MichaelKesner

New Member
Joined
Apr 22, 2019
Messages
2
Location
Virginia
Hi Guys,

I bought a 2007 Cat 262B a couple weeks ago (has 470 hours on it). It's really in pretty good shape, no smoke, engine bay is very clean, no visible leaks in the engine bay, no dry rotted hoses, enclosed cab, everything is really in pretty good shape. Until a few days ago, I found a dark spot on the under carriage. I have been watching it, today, I found a spot under the dark spot. I rubbed my hand in it, it's definitely diesel. The engine bay is drive, I can't find anything wet in the bay. Ideas of what or where this could be coming from?
image0.jpg
 

DIYDAVE

Senior Member
Joined
Feb 18, 2007
Messages
2,420
Location
MD
Look at the top of the injector pump. See any pooling near the top, where the injector lines meet the top of the pump?;)
 

Nige

Senior Member
Joined
Jun 22, 2011
Messages
29,388
Location
G..G..G..Granville.........!! Fetch your cloth.
That plug is the drain plug for the fuel tank. It should be removed on a regular basis to drain water and sediment from the fuel tank. The procedure calls for application of liquid pipe sealer to the threads when reinstalling the plug. I would suggest that you run your tank as low as possible and then remove the plug and reseal.

I take it that you don't have an Operation & Maintenance manual..? The procedure is clearly explained in it.
 
Last edited:

kshansen

Senior Member
Joined
Mar 11, 2012
Messages
11,165
Location
Central New York, USA
Occupation
Retired Mechanic in Stone Quarry
That plug is the drain plug for the fuel tank. It should be removed on a regular basis to drain water and sediment from the fuel tank. The procedure calls for application of liquid pipe sealer to the threads when reinstalling the plug. I would suggest that you run your tank as low as possible and then remove the plug and reseal.

I take it that you don't have an Operation & Maintenance manual..? The procedure is clearly explained in it.

And it's not 100% clear from the picture but it sure looks like that plug has been getting some abuse from dragging on stuff. If pulling like Nige suggests to reseal it and drain crap out of tank I would have a new plug handy to replace it.
 
Top