Good day! I have troubles with my JCB 3cx loader. I was working with it (loading some dirt onto a truck) and everything was working normally. Suddenly I couldn't go forward or backward. The engine starts just fine but I cannot move. I have read a lot on the internet where a lot of people suggested some errors with electronics. This piece is old and almost everything is mechanical. Every advice is appreciated!
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
JCB 3cx (old) won't move forward or backward
- Thread starter Dok
- Start date
-
- Tags
- can't move jcb old
Tinkerer
Senior Member
Welcome to HEF, Dok !!
Sorry I don't know much about JCB's. But, here is a web-link to the service repair manual. ---------> https://www.pdfmanual4trucks.com/jcb/
Sorry I don't know much about JCB's. But, here is a web-link to the service repair manual. ---------> https://www.pdfmanual4trucks.com/jcb/
uptight excavating
Well-Known Member
Had that happen on a 1990 1400B. Same machine I believe. Turned out the weld sheared off that holds the clutch pack to the shaft that it was trying to turn. Simple fix after the trans is removed and totally disassembled. lol
I asked a guy experienced in this kind of stuff and he suggested the same thing. So thanks for info I will go and check it today. Will report the results. Also thanks @Tinkerer for those manuals they will come in handy!