Scraper for D6H

what size scraper could a D6H handle series2 LGP never have had anything to do with scrapers.Are they hard on trnsmission.

Try not to make the mistake of pulling a scraper that’s too big,just because it appears to pull it ok.
I like the dolly style scrapers,and wouldn’t go any more than a Cat 435 behind a D6.
Even that could be a tad to big

Another question mine has a winch on it.It has capped lines at the back for a ripper.So can you have a winch or ripper or use those lines for a scraper only.

might need power beyond line to two auxiliary valves.company in ohio had diverter from tilt circuit for scraper I just added two sections to the blade stack several ways to do it for sure

I think 435 cat too big 70 cat big enough 155 Ashland prolly good match

deerert295 said:

I think 435 cat too big 70 cat big enough 155 Ashland prolly good match

Click to expand...

Agree. My 7G pulled a 435 for alot of it's life. Looks to me about 18 yd pan, 6H would have her hands full.

Thanks guys Looking at size 60 or 70 would do 12 to 14 yard. Deer295 do you have any more info or pictures of the hydraulic stack.

jook24 said:

Thanks guys Looking at size 60 or 70 would do 12 to 14 yard. Deer295 do you have any more info or pictures of the hydraulic stack.

Click to expand...

I was talking about a 750j john deere which had a semi u 2 section standard added 2 sections made 4 valve stack 2 small levers (pilot) next to blade control.Also have D7e electric with 2 spool ripper valve controlled by standard ripper joystick.newer scrapers Deere Ashland Eject Reynolds only need 2 valve they have sequence valve for push off and apron function.One tractor remote valve for these two functions.Bowl lift one remote as well.Many older cat conversions as well as rome pans needed three remotes. your 6h may have one auxiliary for ripper another could be stacked on.Or run from power beyond to added auxiliary valve bank could be manual or electric controlled spool.i hate long posts like this I could tell you with more eloquence and clarity on phone LOL

Thanks deeret295 something like me with texting phone is better for me too LOL. ill dig into mine more and see what it has for valves.