celticcrusader
Well-Known Member
anybody work D/A tractors? what do you think of them? we have 4. anybody got any for sale?
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
deutz-allis tractors
- Thread starter celticcrusader
- Start date
yeah i work with a few. my boss loves them. actually only one is a deutz-allis the other two are deutz before the merge. we've got one mfd trator about 55hp w a loader, a 40-06 twd and a 100-06 that is twd. i'll get dome pics later. what do you have? those air cooled engines are sweet on fuel!
celticcrusader
Well-Known Member
we have a Dx90, 7085 & two 6250's all4x4's some with loaders they are great on fuel! 2 have cabs with heat & a/c always looking for more, something above 100hp
Colin Doy
Well-Known Member
How to D/A work out price wise against other manufacturers?
To import now it's astronomical. in my area parts are nill, but then again we haven't needed many, and to consider that two of the machines are twice my age and then some(i'm 21) I think our 4wd is a 6250. i'm not sure tho, i'll grab some pics this afternoon. We looked at a DX(85 maybe?) tractor that was posted on ebay near our area. to bad we didn't get it, it looked like a a decent tractor. right now i'm waiting on a JD 7130 that was supposed to be here a month ago!
celticcrusader
Well-Known Member
that 6250 we have the same one. I think they are much better than JD's , great on fuel easy on repairs.
celticcrusader
Well-Known Member
you should be able to get parts from allis charmer dealer
stumpjumper83
Senior Member
There is some support for them in lancaster co. pa. The Amish and mennonite have alot of them usually 40-06 and up. An Agco dealer should be able to help you out parts wise, if not them talk to one of the smaller repair shops that deal with them everyday.
deutz 100-06
hi all have a little problem here have a 1977 deutz 100-06 it was running perfat then all of a sudden it stoped change the feil filet but it put it back together but it wood not let the fuel come out of the pump when u turn it over with the lines open i was wondering it there is a lift pump some where the pump is a rotor typ hpe some one can help thanks sam
hi all have a little problem here have a 1977 deutz 100-06 it was running perfat then all of a sudden it stoped change the feil filet but it put it back together but it wood not let the fuel come out of the pump when u turn it over with the lines open i was wondering it there is a lift pump some where the pump is a rotor typ hpe some one can help thanks sam
celticcrusader
Well-Known Member
is it an air cooled motor? try taking fuel line off before fuel filter and take off fuel CAP and blow into fuel tank to make sure it is not plugged also on our tractors with inline injector pumps the lift pump is on the side of inj. pump there is a round cover held on with small bolt [ use 8mm wrench] on top of lift pump underneath cover is a mesh screen that has to be cleaned sometimes hope this helps.
hi yes the motor is a air cooled and the fuel go from the tank to the filter then to the fueil pump have fuel after the filer but this motor hase no viasabl lift pump like my old inlne fuel pump it a bit different with a rotor pump but i will look for the screan u r talk about thank u for your time sam
celticcrusader
Well-Known Member
if it is a rotary inj. pump then the lift pump is part of the pump , inside the injection pump.
OneWelder
Senior Member
Do not know anything about the tractor, - but snow plow is from a ford
100-06 deutz heads
100-06 deutz heads
--------------------------------------------------------------------------------
good morning all a little snow here to wake up to oh well but wood anyone here now what to torque the head bolts to on thie 100-06 the most i can get from the place here is to tighten till it squeaks and was also wondering where to find a good repair ,and parts book this tractor is a green on so not sure of the year thank you for your time
sam
100-06 deutz heads
--------------------------------------------------------------------------------
good morning all a little snow here to wake up to oh well but wood anyone here now what to torque the head bolts to on thie 100-06 the most i can get from the place here is to tighten till it squeaks and was also wondering where to find a good repair ,and parts book this tractor is a green on so not sure of the year thank you for your time
sam
racsan
Member
i was on a hayride tonight and the tractor pulling the flatbed wagon was a newer agco, i beleive what was once the duetz/duetz-allis line. very quiet diesel, you could hear the transmission more than the motor. dont recall the model designation, it had a cab and i was expecting to find a straight six in it, but after looking at the injection pump it was obvisly a 4 cyl. had front-wheel assist also. would have been neat to hook up to some equipment and tried it out in a feild.