2012 New Holland c238

Kip · Apr 16, 2018

I recently purchased a new Holland c238 compant track loader. I can't seem to get the hydradic quick connect for the bucket to work. I pressed the unlock button and the switch on the right joystick and nothing happens? The fuses seem to look good. Any ideas would help.

KSSS · Apr 17, 2018

I had that problem on a TR320 and it was a pinched wire, but I was blowing a fuse. Make sure your fuses are good.

Kip · Apr 17, 2018

Ya my fuses all seem good. Just wondering if it could be the toggle switch on the joystick.

KSSS · Apr 18, 2018

Are you activating the correct switch? The bucket disconnect switch is on the left cab post, I know current NH machines like the CASE machines have it there. Maybe the early NH put it on the handle but that would seem odd to me. Make sure your activating the correct switch. It should be on the cab post.

Kip · Apr 19, 2018

I got it working was doing it wrong. Had to curl the bucket as I unlock the quick connect.

Does anyone know how to activate the aux hyd on the machine?

KSSS · Apr 24, 2018

The roller switch on the right control handle.

Kip · Apr 24, 2018

That is what I have been told, but does not seem to work.

JNB · Apr 25, 2018

You're not the first to have a problem with the roller switch. The fix is a nifty new (and overpriced) handle.

franmech · Apr 25, 2018

You can replace just the roller switch. If a pilot control machine this is most likely your problem. If a mechanical control machine it could possibly be the aux control module.

2012 New Holland c238

Kip

New Member

KSSS

Senior Member

Kip

New Member

KSSS

Senior Member

Kip

New Member

KSSS

Senior Member

Kip

New Member

JNB

Senior Member

franmech

New Member