• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Takeuchi vertical lift track loader

rockman

Well-Known Member
Joined
Oct 10, 2009
Messages
158
Location
Australia
My work has some of the r2s that shut down. They are hard to start afterwards, like they ran out off fuel.
has your work had a machine shut down during a dpf burn cycle and not be able to start again /
mine has done it 4 times now
all my work is on roads and this time is shut down in the middle of the road , lucky that i had traffic control in place
it has become a safety issue and it seems the machine is not ' fit for purpose '
 

05rammer

Well-Known Member
Joined
Nov 11, 2009
Messages
170
Location
Missouri
Not sure about that. I've personally had it shut down right after stating it also had it start up and go directly to limp mode. They've checked the codes and it basically comes back to the fuel filter, which has been changed more than should be trying to figure it out.
 

rockman

Well-Known Member
Joined
Oct 10, 2009
Messages
158
Location
Australia
Not sure about that. I've personally had it shut down right after stating it also had it start up and go directly to limp mode. They've checked the codes and it basically comes back to the fuel filter, which has been changed more than should be trying to figure it out.
all good
thanks
 
Top