• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Is a Lister Diesel worth having?

old-iron-habit

Senior Member
Joined
Nov 22, 2012
Messages
4,233
Location
Moose Lake, MN
Occupation
Retired Cons't. Supt./Hospitals
I stumbled across a light plant that may be able to be purchased very reasonable. It has a Lister Diesel in it that is not running. I remember having light plants in ND in the late 70s with Lister Diesels in them. They started and ran well in winter conditions back then. Are they reasonable to work on and are parts available? Often think a light plant would have some handy uses if I can get I cheap if its worth fixing but don't want to get into one that no parts are available.
 

Delmer

Senior Member
Joined
Jan 3, 2013
Messages
8,865
Location
WI
Ever hear of a "listeroid"? Lister was one of the early engines to have a good enough reputation worldwide to be copied. You could probably buy a rebuild kit for $10 in south Asia.

Between knockoff parts, ebay, and cobbling, I doubt there's anything you couldn't replace. I don't know anything about specific models besides having seen a few around. There is an Amish engine shop not too far away that works on them also, among virtually every other diesel make.
 

check

Senior Member
Joined
Apr 1, 2012
Messages
800
Location
in the mail
The question needs clarification. There are the ancient low RPM Listers than run forever on the worst of fuel, then there are the air cooled Listers of the 1970's and 1980's which were designed to run 40,000 hours before needing the first overhaul and there are the post-merger water-cooled Lister-Petters.
 

Birken Vogt

Charter Member
Joined
Nov 30, 2003
Messages
5,305
Location
Grass Valley, Ca
The ancient one-lungers that look like the hit-and-miss engines at the fair are for the birds.

But I can't help but like the air cooled ones from around the 70s. They are so massively simple and reliable it makes you wish somebody made them today.

The more modern ones are pretty much like any other tractor diesel, nothing special about them, parts a little hard to find but generally reliable if a bit leaky.
 

Queenslander

Senior Member
Joined
Apr 5, 2009
Messages
1,228
Location
Australia
Anyone who has been around the old CS single cylinder watercooled Listers would recognise this sound.
Parts "shouldn't" be a problem, they still sell new engines, here at least.
We didn't get mains power until 1983 and still have our twin cyl SR2 with 6kva lighting plant, hard wired into the household circuit for emergency use.
It was originally set up so that any light switch in the house would start it and last light off would shut it down.
 

thepumpguysc

Senior Member
Joined
Mar 18, 2010
Messages
7,445
Location
Sunny South Carolina
Occupation
Master Inj.Pump rebuilder
They are "throw away" engines in Marine Generator use here.. So inexpensive that if anything Major is needed its just as cheap to get a new "drop in"..
 

Welder Dave

Senior Member
Joined
Oct 11, 2014
Messages
12,260
Location
Canada
They were used a lot in oilfield applications if I recall and were known for being long life reliable engines.
 

old-iron-habit

Senior Member
Joined
Nov 22, 2012
Messages
4,233
Location
Moose Lake, MN
Occupation
Retired Cons't. Supt./Hospitals
Thanks. I am going to go check it out. I'll let you know what I find out when I see it.
 

RayF

Senior Member
Joined
Jul 8, 2011
Messages
640
Location
Perth Western australia
Occupation
lineborer/welder
There's not to many Lister's that aren't repairable. I have 2 diesels,one air cooled and one water cooled. I restored a 1926 petrol Model L. I was able to buy new valves for it. They were built to work hard and long.
 

check

Senior Member
Joined
Apr 1, 2012
Messages
800
Location
in the mail
Mine is an ST2. I bought it as a basket case. One thing I like is the weight of the flywheel. Mine runs a generator and a heavy flywheel sure helps the governor keep the speed steady.
 

Attachments

  • cat 002.JPG
    cat 002.JPG
    2 MB · Views: 40
  • cat 001.JPG
    cat 001.JPG
    1.9 MB · Views: 40

old-iron-habit

Senior Member
Joined
Nov 22, 2012
Messages
4,233
Location
Moose Lake, MN
Occupation
Retired Cons't. Supt./Hospitals
I ended up not getting it. After not getting a bite on his Craigslist add in two weeks, he sold it to a guy he knew for $5.00. He was also giving him a bunch of new parts with it. The guy took the light plant, never paid him the five dollars, so he kept the parts and told me the guy can go pound sand and find parts elsewhere. There I go again, 4 days and 5 dollars short. I did score 2 brand new 14:00-24 12 ply Goodyear grader tires though. I don't need them but I couldn't pass them up. They would work on my 922A but my tires are good yet.
 
Top