tagaman
Member
My 345b excavator cuts engine off when I try to operate implements at the same time traction is slow but engine runs perfectly
Any excess smoke coming out exhaust , try changing fuel filter ,draining water separator.
Good morningCheck diesel hoses. If there is no black smoke it can probably be fuel shortage.
Good morning NigeriaI would say you are looking at a control issue in the hydraulic system that is not allowing the pump to de-stroke when hydraulic load is applied. That's what will drag the engine speed down.
If what I suspect is the problem is actually confirmed and you were to bypass something to prevent pump overloading lugging the engine down the machine would become so slow that although it would dig it would not produce anything because the hydraulics would have been slowed down to snail-speed. Unfortunately there are no short cuts here ......Good morning Nigeria
So what can I basically look at that makes the pump to destroke considering that the cluster is not working and I am financially not stable. Help me to just bypass something and make the machine to dig
Regards